-
-
'15 • HM-T-246
P arts prepared on site
Accessories
Remote control main unit, wood screw (
φ
. x ) pcs, User' s Manual,
Installation Manual (in CD-R)
Item name
Q' ty
Remarks
Switch box
For piece or pieces (JIS C 0)
pc
There are not necessary when
installing R/C directly on a wall
Thin steel conduit tube (JIS C 0) As required
Lock nut, bushing (JIS C 0)
As required
Cable cover
As required
N ecessary to run R/C cable on the
wall
P utty
Suitably
For sealing gaps
Molly anchor
As required
R/C cable (0.mm
x -core)
shielding wire (MV V S)
As required
Be sure to ground both ends.
See right table when longer than
00m
e
h
T
appliance shall be installed in accordance with national wiring regulations.
k
s
A
a professional contractor to carry out the installation work according to the installation manual.
Improper installation work may result in electric shocks,
or break-down.
t
u
h
S
off the main power before starting electrical work.
Otherwise, it could result in electric shocks, break-down or malfunction.
o
D not install the unit in inappropriate environment or where in ammable gas could generate, ow in, accumulate or leak
If the unit is used at places where air contains dense oil mist, steam, organic solvent vapor, corrosive gas
(ammonium, sulfuric compound, acid, etc) or where acidic or alkaline solution, special spray, etc are used,
It could cause electric shocks, break-down, smoke or re as a result of signi cant deterioration of its performance or corrosion.
o
D not install the unit where water vapor is generated excessively or condensation occurs.
It could cause electric shocks,
or break-down.
e
s
U
the
cables for wiring, and connect them securely with care to protect electronic parts from external force
Improper connections or
could cause heat generation,
etc.
l
a
e
S
the inlet hole for remote control cable with putty.
If moisture, water, insect, etc. enters through the hole, it could cause electric shocks,
or break-down.
n
e
h
W
installing the unit at a hospital, telecommunication facility, etc., take measures to suppress noises.
It could cause malfunction or break-down due to hazardous effects on the inverter, in-house power generator, high frequency
medical equipment, etc.
The
transmitted from the remote control to medical or communication equipment could disrupt medical activities,
video broadcasting or cause noise interference.
1. Safety precautions
e
s
a
e
l
P
read this manual carefully before the installation work to install the unit properly.
E very one of the following instructions is important to be observed strictly.
WARNING
e
r
u
l
i
a
F
to follow these instructions may result in serious consequences such as death,
severe injury, etc.
CAUTION
e
r
u
l
i
a
F
to follow these instructions may cause personal injury or property damage.
It could have serious consequences depending on the circumstances.
pictograms used in the text have following meanings.
Never do.
Always follow the instructions given.
p
e
e
K
this manual at a safe place where you can consult with whenever necessary.
Show this manual to a installer when moving or repairing the unit.
When the ownership of this unit is transferred, this " Installation Manual" should be given to a
new owner.
WARNING
CAUTION
o
D not install the remote control at following places
It could cause break-down or deformation of remote control.
() Where it is exposed to direct sunlight
() N ear the equipment to generate heat
() Where the surface is not
o
D not leave the remote control with its upper case removed.
When the upper case is removed, put it in a packing box or packing bag to protect P CBs or other parts inside of it from dust,
moisture, etc.
e
h
T
appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities, or lack of expe-
rience and knowledge, unless they have been given supervision or instruction.
n
e
r
d
l
i
h
C
shall be supervised not to play with appliance.
This installation manual describes the installation methods and precautions related to the remote control.
Use this manual together with the user’s manuals for the heat pump water heater and other option equipment.
P lease read this manual carefully before starting the installation work to install the unit properly.
3. Installation place
2. Accessories & parts prepared at site
The max size for the wires used in the R/C case is
0.mm
.
Therefore when the cable length is longer than
00m, connect the wires from R/C to larger size
ones near the outside of R/C.
When wires are connected, take measure to prevent
water, etc from entering inside of connected part.
＜
00m 0.mm
x -core shielding wire (MV V S)
＜
00m 0.mm
x -core shielding wire (MV V S)
＜
00m .mm
x -core shielding wire (MV V S)
＜
00m .0mm
x -core shielding wire (MV V S)
Installing method
[With using a switch box]
[Installed directly on a wall]
Wiring direction
[Backward]
[Upper center] or [Upper left]
Cautions for selecting installation place
() Installation surface must be
and
strong.
R/C case must not be deformed.
Wiring
0mm
0mm
0mm
0mm
Secure minimum spaces for
disassembling the case.
Top face/R-L side face
≧
0mm
Bottom face
≧
0mm.
If using L-shaped screw-driver,
0mm or more is available.
Request
Do not install the R/C at a place where it is exposed to direct sunlight or surrounding air temperature exceeds 0
℃
or drop below 0
℃
.
It could cause discoloration, deformation, malfunction or break-down.
PJZ012D103
3.2 Installation work for remote control
AMP Air Conditioning
www.ampair.co.uk | [email protected]
Summary of Contents for ESA30E-25
Page 69: ... 15 HM T 246 AMP Air Conditioning www ampair co uk sales ampair co uk ...
Page 71: ... 15 HM T 246 0 WARNING CAUTION AMP Air Conditioning www ampair co uk sales ampair co uk ...
Page 85: ... 15 HM T 246 4 3 System diagram 㪄㪈㪌㪄 AMP Air Conditioning www ampair co uk sales ampair co uk ...
Page 91: ... 15 HM T 246 0 CAUTION AMP Air Conditioning www ampair co uk sales ampair co uk ...
