Mitsubishi Heavy Industries ESA30E-25, Technical Manual

Page: 27 / 239

- -
'15 • HM-T-246
(3) Set the hot water amount.
①
Carry out the same procedure as [()-
①
and
② ②
-)
When tapping N ext button
③
-)
②
Change the setting of hot water amount at :00 to 0% in order to top up to 0% of the full hot water amount until :00.
Tap the line of [/:00/0%] and then tap Change button (Screen
③
-)
③
Since [Hot water amount setting] screen is displayed, set 0% by tapping
▲ ▼
buttons and tap Set button. (Screen
③
-)
④ ⑧
].
(Screen
③
-)
(4) Set Peak-cut timer
①
When pushing Schedule setting switch on the panel of RC, the [Setting of schedule] menu screen is displayed. (Screen
②
-)
②
When tapping [Setting of peak-cut] on the screen
②
-, [P eak-cut timer] screen for selecting the day of the week is displayed.
Tap All days button. (Screen
④
-).
④
-)
<Complement> Select the day to be set from Week days , Sat, Sun, All days and E ach day buttons.
③
Set the P eak-cut % to 0% in order for the heat pump unit not to be started operation to top up from 0:00 to :00.
When tapping the line of [/Invalid/ ], the column of set item is highlighted in reverse. Tap Change button (Screen
④
-)
④
The detail setting screen for setting the contents of P eak-cut timer is displayed.(Screen
④
-).
[Screen
③
-] [Screen
③
-] [Screen
③
-]
Back
Set
Time
[Screen
④
-] [Screen
④
-]
Back
Select the item
[Screen
④
-]
⑤
Set the V alid/Invalid , P eak-cut % ,[Start time] and [E nd time] with each button on the detail setting screen.
• In order to set “V alid”, by tapping the Invalid button to change to V alid . (Screen
④
-)
• Tap the P eak-cut % button and set the “P eak-cut %” to 0% by tapping
▲ ▼
buttons. (Screen
④
-)
• Tap the Change button and set Start time at 0:00 and E nd time at :00 by tapping
▲ ▼
buttons. (Screen
④
-)
[Screen
④
-] [Screen
④
-] [Screen
④
-]
AMP Air Conditioning www.ampair.co.uk | sales@ampair.co.uk