Mitsubishi Electric CAHV-P500YB-HPB, Service Handbook

Page: 50 / 169

[
IV
Remote Controller ]
- 43 -
HWE15070 GB
IV
Remote Controller
[1] Using the Remote Controller
<1> Starting and Stopping Operation and
Changing the Operation Mode
To Start Operation
1. Press the ON/OFF (BACK) button .
The power indicator and the display will light up.
To Stop Operation
1. Press the ON/OFF (BACK) button while the unit is in operation.
The power indicator and the display will light off.
The remote controller will remember the last mode and temperature
settings when turned off.
To select the Mode
1. With the power turned on, press the Mode (BACK) button until the
desired mode appears.
• Each press changes the operation mode in the following sequence
(see notes *1 and *2 below):
Heating→Heating ECO→Hot water→Anti-freeze→Cooling
→Back to Heating.
The currently selected mode will appear in the area labeled .
*1 The available modes vary depending on the model.
*2 Refer to [4]-2. (2) (page 49) for how to change the settings for a
specific function.
PAR-W21MAA
ON/OFF TEMP.
MENU
BACK DAY CHECK TEST MONITOR/SET
CLOCK CLEAR
ON/OFF INITIAL SETTING
CIR.WATER
˚C
˚C
Power
Indicator
Mode (BACK)
button
Set Tempera-
ture buttons
ON/OFF
(BACK)
button
1
1
2
2
2
3
3
4
1
1
1
1
2
0000001906.book 43 ページ ２０１５年１１月５日 木曜日 午前１１時５５分