manualshive.com logo in svg

Mitel SX-2000 EL, Information Manual

Discover everything you need to know about the Mitel SX-2000 EL with our comprehensive Information Manual. This essential manual is available for free download from manualshive.com, equipping you with all the necessary insights to maximize your experience with this cutting-edge product. Find it now and elevate your communication capabilities.

Share
Download
background image

SX-200 General Information Guide

160

Revision A

50003510

Headset with In-Line Switch Operation

SUPERSET 4000 telephones can be equipped with headsets that have an in-line switch. You 
can use this in-line switch to

•

Answer an incoming call

•

Terminate a call

•

Mute the headset microphone.

You can combine headset operation with the auto-answer feature for complete handsfree 
operation.

Hold

This feature enables the set user to put the current call on hold and replace the handset or use 
the set for other calls. While the call is on hold, the user can select all features usually available 
on the set. The call on hold can be retrieved at the telephone that placed it on hold or at another 
telephone. This hold feature differs in operation from the Temporary Consultation Hold that 
occurs during a Call Transfer. See Transfer. See Add Held and Auto-Hold for set hold features. 
See also Attendant Hold Positions.

Hold Reminder

This feature reminds a user that there is a call on hold at the set. The user hears a single burst 
of tone at regular intervals until the call is retrieved from hold.

You can program the length of time that the system waits before providing the first reminder 
tone, as well as the time interval between the reminder tones.

Holiday Messages

SUPERSET telephones can display a holiday message at Christmas and New Year’s. Each 
minute, the holiday message alternates with the usual time and date message that appears on 
the SUPERSET telephone display.

Hot Line

Individual sets can be programmed through CDE as hot lines. When the caller goes off hook, 
the system automatically dials a preprogrammed internal or external number. This feature is 
typically used for accessing taxi dispatchers or help desk operations.

Hotel/Motel (Lodging)

The hotel/motel feature package integrates standard system features with custom hotel/motel 
features. The system can also interface with a property management system (PMS). The 
hotel/motel and property management features are purchasable options.

The SX-200 EL or SX-200 ML system with LIGHTWARE 17 or greater software can operate 
with either the Hotel/Motel Package or the Property Management System package, but not 
both packages on the same system.

Summary of Contents for SX-2000 EL



































































































































































































































































Reviews:

No comments

Related manuals for SX-2000 EL

Samsung OFFICESERV 100 Series System Administration Manual preview
OFFICESERV 100 Series
Brand: Samsung Pages: 42
salmson ZOOM Installation And Operating Instructions Manual preview
ZOOM
Brand: salmson Pages: 12
Waters ACQUITY System Manual preview
ACQUITY
Brand: Waters Pages: 116
Selta NETFON 130 User Manual preview
NETFON 130
Brand: Selta Pages: 102
nedis MPWL631BK Manual preview
MPWL631BK
Brand: nedis Pages: 37
Vingtor Stentofon ACM-M-A-V2 Technical Manual preview
ACM-M-A-V2
Brand: Vingtor Stentofon Pages: 32
GE 28128xx3 User Manual preview
28128xx3
Brand: GE Pages: 68
Uniden DXAI7288-2 Guide Utilisateur preview
DXAI7288-2
Brand: Uniden Pages: 68
Octet Matrix Audio DW4416-DW50 User Manual preview
DW4416-DW50
Brand: Octet Matrix Audio Pages: 14
Swissvoice XTRA 3355 User Manual preview
XTRA 3355
Brand: Swissvoice Pages: 42
Uniden TRU348 Owner'S Manual preview
TRU348
Brand: Uniden Pages: 64
SONIQ Qplay QPC100 Operation Manual preview
Qplay QPC100
Brand: SONIQ Pages: 7
Daewoo AXL-125 Service Manual preview
AXL-125
Brand: Daewoo Pages: 22
Alcate 4052O Safety And Warranty Manual preview
4052O
Brand: Alcate Pages: 17
BT DIVERSE 6410 User Manual preview
DIVERSE 6410
Brand: BT Pages: 82
Talkaphone WEBS-MT/R Installation Instructions Manual preview
WEBS-MT/R
Brand: Talkaphone Pages: 8
MAJORITY Fitzwilliam 3 Instruction Manual preview
Fitzwilliam 3
Brand: MAJORITY Pages: 32
Trevi HCV 1035 BT User Manual preview
HCV 1035 BT
Brand: Trevi Pages: 46

Brands by name

Popular brands

Load more brands