manualshive.com logo in svg

Mitel SX-2000 EL, Information Manual

Discover everything you need to know about the Mitel SX-2000 EL with our comprehensive Information Manual. This essential manual is available for free download from manualshive.com, equipping you with all the necessary insights to maximize your experience with this cutting-edge product. Find it now and elevate your communication capabilities.

Share
Download
background image

Supporting Applications

50003510

Revision A

31

The BRI card supports the following ISDN Services:

•

Calling Party Number (CPN)

 - This number substitutes the calling station number on 

outgoing calls for purposes of network identification and call back.

•

Calling Name ID (CNID)

 - This ID is the incoming call name delivery per NA DMS100 

custom specification.This Calling Name feature is an option that must be enabled at the 
Central Office. The SX-200 only supports the inbound calling name. 

•

Calling Line Identification Presentation (CLIP

) - The Calling Party Number can be 

provided to the ISDN Network for outgoing calls or provided to the BRI card from the ISDN 
Network for incoming calls. This information is passed onto the system and can be used 
for database applications such as screen pops and for inclusion in SMDR records.

•

Calling Line Identification Restriction (CLIR)

 - This feature allows users to prevent their 

telephone number from being presented to the called party.

ISDN Primary Rate Interface Card

ISDN Primary Rate Interface (PRI) is becoming the most cost-effective solution for accessing 
enhanced voice capabilities. All inbound and outbound services that are usually obtained by 
using different trunk types (such as INWATS, OUTWATS, FX, Tie, and DID) can be accessed 
with a single ISDN trunk; as a result, the number of system trunks can be reduced by 10 to 15 
percent. On outbound calls, the system requests the required service from the Network. The 
trunk takes on the requested characteristics for the duration of the call. 

The PRI card provides two ISDN links and provides the same functionality as the two link ISDN 
Network Gateway. The PRI card has the Bearer Capabilities (BC) of Speech (voice) and 3.1 
kHz audio. The card also transports the BCs of rate-adapted 56 kbs data and unrestricted 64 
kbs data transparently through the system.

The PRI card supports the following ISDN network services:

•

Calling Party Number (CPN)

 - This number substitutes the calling station number on 

outgoing calls for purposes of network identification and call back.

•

Calling Name ID (CNID)

 - This ID is the incoming calling name delivery per NA DMS100 

custom specification or National ISDN-3 (NI3). 

•

Calling Line Identification Presentation (CLIP

) - The Calling Party Number can be 

provided to the ISDN Network for outgoing calls or provided to the PRI card from the ISDN 
Network for incoming calls. This information is passed onto the system and can be used 
for database applications such as screen pops and for inclusion in SMDR records.

•

Calling Line Identification Restriction (CLIR)

 - This feature allows users to prevent their 

telephone number from being presented to the called party.

•

Partial PRI Links -

 The SX-200 PRI card will support COs that provide this feature.

•

Direct Dial-In  (DDI)

 -  DDI is an ISDN option that allows direct access to a line behind a 

system through a unique directory number. This allows the dialed digits of an incoming 
ISDN call to be presented to the system. All ISDN trunks are treated as Dial-In trunks; the 
CO always sends digits to the system.

Summary of Contents for SX-2000 EL



































































































































































































































































Reviews:

No comments

Related manuals for SX-2000 EL

Samson EXPEDITION XP40iw Quick Start Manual preview
EXPEDITION XP40iw
Brand: Samson Pages: 2
Panasonic KX-TGP600 How To Use preview
KX-TGP600
Brand: Panasonic Pages: 5
Panasonic KX-TGP600 Quick User Manual preview
KX-TGP600
Brand: Panasonic Pages: 4
Panasonic KX-TGP600 Quick Start Manual preview
KX-TGP600
Brand: Panasonic Pages: 24
Panasonic KX-TD816 Quick Reference Manual preview
KX-TD816
Brand: Panasonic Pages: 42
Panasonic KX-TGP700 Quick Start Manual preview
KX-TGP700
Brand: Panasonic Pages: 135
Yealink SIP-T18P User Manual preview
SIP-T18P
Brand: Yealink Pages: 21
Halsey Taylor GreenSpec HTHB-HVRGRN Installation, Care & Use Manual preview
GreenSpec HTHB-HVRGRN
Brand: Halsey Taylor Pages: 7
Uniden Extend-A-Phone Operating Manual preview
Extend-A-Phone
Brand: Uniden Pages: 51
Sierra NS-1N30-00 Manual preview
NS-1N30-00
Brand: Sierra Pages: 11
Grundig CIRFLEXX UMS 4100 Service Manual preview
CIRFLEXX UMS 4100
Brand: Grundig Pages: 38
Gigaset Gigaset CX100 isdn Instructions Manual preview
Gigaset CX100 isdn
Brand: Gigaset Pages: 123
Guardian Audio IQ series Owner'S Manual preview
IQ series
Brand: Guardian Audio Pages: 4
Aastra Maestro 4625 Owner's Owner'S Manual preview
Maestro 4625 Owner's
Brand: Aastra Pages: 38
Uniden ANA 9610 Operating Manual preview
ANA 9610
Brand: Uniden Pages: 46
VTech ES1210 User Manual preview
ES1210
Brand: VTech Pages: 37
Ericsson DT288 Quick Reference Manual preview
DT288
Brand: Ericsson Pages: 2
Serene HD-60 Operating Manual preview
HD-60
Brand: Serene Pages: 2

Brands by name

Popular brands

Load more brands