manualshive.com logo in svg

Mitel SX-2000 EL, Information Manual

Discover everything you need to know about the Mitel SX-2000 EL with our comprehensive Information Manual. This essential manual is available for free download from manualshive.com, equipping you with all the necessary insights to maximize your experience with this cutting-edge product. Find it now and elevate your communication capabilities.

Share
Download
background image

Feature Description

50003510

Revision A

163

Hotel/Motel - Audit Screen

The Audit Screen in entered from the House Statistics screen by pressing the Audit softkey. 
This screen is used to generate various kinds of audits (hard copy reports). Each kind of audit 
appears as a corresponding softkey.

Hotel/Motel -  Wakeups

This feature provides automatic and personal wakeup calls to the guest room. The attendant, 
sub-attendant, or guest can set up multiple automatic wakeup calls that will ring the guest room 
at a prearranged time. The attendant or sub-attendant can set up multiple personal wakeup 
calls that issue a callback to the attendant or the sub-attendant so they can personally provide 
the wakeup call to the guest.

Multiple (up to 3 in a 24-hour period) personal or automatic wakeups may be set to occur once 
or daily. Daily, multiple, and  personal calls are dependant on the MOSS Option 102 (Feature 
Level) being enabled to level 1 or greater.

Existing wakeup calls can be modified or canceled. After answering a wakeup call, the extension 
user receives either a special tone, music, or a recorded announcement. A different recorded 
announcement can be given when the system is in night service.

If the wakeup call is not answered within six rings, or if the extension is busy, an attempt is 
made to ring the extension two more times at 5 minute intervals. Each wakeup attempt can 
generate a single line report on a system printer. If the call is still unanswered, the wakeup is 
canceled and the attendant can be notified that the wakeup was not honored. Wakeup calls to 
a SUPERSET 4150 or SUPERSET 430 telephone are treated as a timed reminder ringing the 
set once and setting a reminder prompt. A wakeup attempt on a SUPERSET display telephone 
does not generate a single line report. The Attendant can print a list of all of the current Wakeup 
requests.

Hotel/Motel - Call Blocking

Call Blocking allows the attendant or subattendant to inhibit room-to-room calls. Users of an 
attendant console, or SUPERSET 430 and SUPERSET 4150 telephones programmed as 
subattendants, can activate or deactivate this feature. Calls to the attendant, subattendant, or 
to extensions without the Call Blocking COS option selected may be made as usual. The system 
treats attempted calls between restricted extensions as illegal numbers and gives the calling 
party reorder tone. Alternatively, Call Rerouting can be used to intercept blocked calls to an 
appropriate destination such as the Attendant Console. See Call Rerouting.

Hotel/Motel - Call Restriction

The Call Restriction feature is used to give each guest room a level of calling privilege. The 
three levels are

•

Internal

•

Local

•

Long Distance.

Summary of Contents for SX-2000 EL



































































































































































































































































Reviews:

No comments

Related manuals for SX-2000 EL

JAMO D 590 Manual preview
D 590
Brand: JAMO Pages: 8
Oklahoma Sound WM-200H Instruction Manual preview
WM-200H
Brand: Oklahoma Sound Pages: 2
Uniden DECT1560 Series User Manual preview
DECT1560 Series
Brand: Uniden Pages: 64
Fender Passport Conference 2 Series Owner'S Manual preview
Passport Conference 2 Series
Brand: Fender Pages: 20
Vodavi STARPLUS Triad-S 1 User Manual preview
STARPLUS Triad-S 1
Brand: Vodavi Pages: 19
Gigaset Gigaset 5010 Instructions Manual preview
Gigaset 5010
Brand: Gigaset Pages: 26
Azden 310HT Instruction Manual preview
310HT
Brand: Azden Pages: 12
CARVIN UX16-MC Instruction Manual preview
UX16-MC
Brand: CARVIN Pages: 4
AT&T ATT-E2120 User Manual preview
ATT-E2120
Brand: AT&T Pages: 32
Curtis TID890 Owner'S Manual And Operating Instructions preview
TID890
Brand: Curtis Pages: 4
Karel MS128 Easy To Use Owner'S Manual preview
MS128
Brand: Karel Pages: 80
deconta C 30 L Instruction Manual preview
C 30 L
Brand: deconta Pages: 12
Doro PhoneEasy 331ph Manual preview
PhoneEasy 331ph
Brand: Doro Pages: 2
GE 28300EE2 User Manual preview
28300EE2
Brand: GE Pages: 100
Serene HD-60 Operating Manual preview
HD-60
Brand: Serene Pages: 2
Savannah Speros NEC User Manual preview
Speros NEC
Brand: Savannah Pages: 9
Simeon Audita User Manual preview
Audita
Brand: Simeon Pages: 32
Yosin Auto-Attendant System Installation & Programming Manual preview
Auto-Attendant System
Brand: Yosin Pages: 17

Brands by name

Popular brands

Load more brands