manualshive.com logo in svg

Mitel SX-2000 EL, Information Manual

Discover everything you need to know about the Mitel SX-2000 EL with our comprehensive Information Manual. This essential manual is available for free download from manualshive.com, equipping you with all the necessary insights to maximize your experience with this cutting-edge product. Find it now and elevate your communication capabilities.

Share
Download
background image

SX-200 General Information Guide

184

Revision A

50003510

Customer programming printouts may be directed to any or all of seven user defined printers. 
A maximum of six DNIC-based printer ports can be defined; the remaining port is the system 
printer port.

Priority Dial 0

The Priority Dial 0 feature can be used to provide an alternate dial 0 routing for extensions in 
the system. Priority Dial 0 and Dial 0 have separate DAY/NIGHT routing points.

Privacy Enable/Privacy Release

A multi-line SUPERSET telephone may have appearances of Key, Direct Trunk Select, CO 
Line, and Private Trunk lines that are shared with other sets. When privacy is enabled, while 
a conversation is in progress, other sets with an appearance of the same line are denied access. 
The user of the line can, however, use the Privacy Release feature to allow the other sets to 
join the conversation. See Line Privacy.

If the customer wishes to have their calls public to begin with (privacy released at the beginning 
of a call), the COS option "Privacy Released at Start of Call" may be enabled. To obtain privacy, 
the user then presses a Make Private softkey or a Privacy Release feature key.

Programmable Key Module (PKM)

A Programmable Key Module provides a set with additional personal keys. There are two 
models available:

•

Mitel Networks Programmable Key Module 48 (PKM 48) for SUPERSET 4025, SUPER-
SET 4125,and SUPERSET 4150 telephones that are equipped with an interface module 
(SIM 1 or SIM 2), and for consoles with a DSS/BLF Interface unit

•

Mitel Networks Programmable Key Module 12 (PKM 12) for SUPERSET 4025, SUPER-
SET 4125, and SUPERSET 4150 telephones that are equipped with an interface module 
(SIM 1 or SIM 2).

Mitel Networks Programmable Key Module 48 (PKM 48) 

provides SUPERSET 4025, 

SUPERSET 4125, SUPERSET 4150 telephones, and attendant consoles with 48 additional 
personal keys. The SUPERSET telephone requires a SIM 1 or SIM 2 in its base to interface to 
the PKM 48. The attendant console requires a DSS/BLF Interface unit. When an attendant 
console has a DSS/BLF interface unit associated with it, only busy lamp field/direct trunk select 
keys can be programmed.When a PKM 48 is associated with a set, the keys can be programmed 
with the following functions:

•

Speed call keys

•

Feature keys

•

Key line appearances

•

Personal outgoing line keys

•

Key system appearances

•

Multi-call line appearances

•

CO line keys

•

Busy lamp field/direct station select keys.

Summary of Contents for SX-2000 EL



































































































































































































































































Reviews:

No comments

Related manuals for SX-2000 EL

DAC Limited 711 Series User Manual preview
711 Series
Brand: DAC Limited Pages: 12
Uniden EP200 Owner'S Manual preview
EP200
Brand: Uniden Pages: 49
Panasonic KX-TVM50 Feature Manual preview
KX-TVM50
Brand: Panasonic Pages: 120
Yealink W76P Quick Start Manual preview
W76P
Brand: Yealink Pages: 8
Yealink W56 Quick Reference Manual preview
W56
Brand: Yealink Pages: 2
Uniden 1035 Series Owner'S Manual preview
1035 Series
Brand: Uniden Pages: 28
Telstra Slimline 25 User Manual preview
Slimline 25
Brand: Telstra Pages: 6
Telstra V900 TWIN - Manual preview
V900 TWIN -
Brand: Telstra Pages: 40
Pro-Ject Audio Systems Box Design BT Box S2 Instructions For Use Manual preview
Box Design BT Box S2
Brand: Pro-Ject Audio Systems Pages: 6
Walker Clarity Extra W1100 User Manual preview
Clarity Extra W1100
Brand: Walker Pages: 27
Roadstar DPL-8810 Service Manual preview
DPL-8810
Brand: Roadstar Pages: 23
T-Home Comfort Pro CM 510 User Manual preview
Comfort Pro CM 510
Brand: T-Home Pages: 156
Pattfield PE-HWA 630 Translation Of The Original Instructions preview
PE-HWA 630
Brand: Pattfield Pages: 94
Ericsson DT288 Quick Reference Manual preview
DT288
Brand: Ericsson Pages: 2
DAPAudio WCA Pack Product Manual preview
WCA Pack
Brand: DAPAudio Pages: 17
Alto AU-800P Series Service Manual preview
AU-800P Series
Brand: Alto Pages: 18
Swissvoice Avena 748 User Manual preview
Avena 748
Brand: Swissvoice Pages: 20
GE Skype 810 User Manual preview
Skype 810
Brand: GE Pages: 60

Brands by name

Popular brands

Load more brands