manualshive.com logo in svg

Mitel SX-2000 EL, Information Manual

Discover everything you need to know about the Mitel SX-2000 EL with our comprehensive Information Manual. This essential manual is available for free download from manualshive.com, equipping you with all the necessary insights to maximize your experience with this cutting-edge product. Find it now and elevate your communication capabilities.

Share
Download
background image

Feature Description

50003510

Revision A

135

ACD - Recorded Announcements 

Recorded announcements are used to tell callers about the progress of their call while waiting 
in the queue for the first available agent.

ACD - Sets   

SUPERSET 4DN, SUPERSET 410, SUPERSET420, SUPERSET430, SUPERSET 4015, 
SUPERSET4025 and SUPERSET4150 telephones sets provide interactive displays ind 
information to agent groups and individual agents. SUPERSET 4025, SUPERSET 4125, and 
SUPERSET 420 telephones may be used in the senior supervisor, supervisor, or agent 
positions with the ACD TELEMARKETER feature package. SUPERSET 4015 and SUPERSET 
410 telephones may be used in the agent position only.

Automatic Number Identification (ANI) on Outgoing Trunks

The Automatic Number Identification (ANI) feature allows the system to identify a calling party 
to the far end device on an outgoing trunk. After the system has successfully dialed an external 
number on the trunk the system identifies the calling party by sending the calling party’s 
extension number as tones or pulses on the trunk.

Automatic Number Identification (ANI) / Dialed Number Identification Service (DNIS) on 
Incoming Trunks 

This feature allows the SX-200 EL amd SX-200 ML systems to identify Automatic Number 
Identification (ANI) numbers and Dialed Number Identification Service (DNIS) numbers that 
are transmitted to the system on an incoming trunk. ANI provides the telephone number of the 
calling party, while DNIS provides the telephone number dialed by the calling party.

The SX-200 EL/ML sustems can receive ANI and DNIS numbers on specific types of incoming 
non-DISA trunks. After receiving ANI and DNIS numbers for an incoming call, the system can 
then make the numbers available to other functions within the system. The system can be 
programmed to provide ANI and DNIS numbers to SUPERSET display telephones, to 
SUPERSET consoles, to SMDR printers, and to the MAI platform.

On a SUPERSET console, the ANI and DNIS digits for an incoming call are displayed after the 
call is answered. The ANI digits appear where the trunk information is normally displayed, and 
the DNIS digits overwrite the COS and COR fields on the console display. When ANI digits are 
not received, the trunk information is shown instead, and when DNIS digits are not received, 
the COS and COR fields are visible. By default, ANI and DNIS numbers are not displayed.

On SUPERSET display telephones, the display shows DNIS or ANI digits while the call is 
unanswered. After the user answers the call, the ANI digits are displayed. When COS - Display 
ANI Information Only is enabled, the SUPERSET telephone displays the ANI digits during both 
the unanswered and answered states. Whenever ANI or DNIS digits are not available for a call, 
the display shows the normal trunk information. By default, ANI and DNIS numbers are not 
displayed.

The system can be programmed to record ANI and DNIS digits in the SMDR reports. The digits 
are recorded at the end of the trunk SMDR record. Both ANI and DNIS numbers are recorded 

Summary of Contents for SX-2000 EL



































































































































































































































































Reviews:

No comments

Related manuals for SX-2000 EL

NEC AT-50 Quick User Manual preview
AT-50
Brand: NEC Pages: 2
Samsung Vodafone SGH-L810V Service Manual preview
Vodafone SGH-L810V
Brand: Samsung Pages: 93
Nady Systems Encore I User Manual preview
Encore I
Brand: Nady Systems Pages: 11
PABX MS308 User Manual preview
MS308
Brand: PABX Pages: 27
AT&T ML17928 Quick Start Manual preview
ML17928
Brand: AT&T Pages: 10
BT Granite User Manual preview
Granite
Brand: BT Pages: 2
Grundig CIRFLEXX UMS 4100 Service Manual preview
CIRFLEXX UMS 4100
Brand: Grundig Pages: 38
Samson XPDm Owner'S Manual preview
XPDm
Brand: Samson Pages: 14
Telos DESKTOP DIRECTOR 2101 User Manual preview
DESKTOP DIRECTOR 2101
Brand: Telos Pages: 46
audiophony UHF410 Series User Manual preview
UHF410 Series
Brand: audiophony Pages: 27
Logitech 980590-0403 - Cordless Internet Handset USB VoIP Wireless Phone Quick Start Manual preview
980590-0403 - Cordless Internet Handset USB VoIP Wireless Phone
Brand: Logitech Pages: 2
Sonos PLAY:3 Quick Start Manual preview
PLAY:3
Brand: Sonos Pages: 15
BT HUDSON 1500 User Manual preview
HUDSON 1500
Brand: BT Pages: 2
jWIN JX-CD3003d Owner'S Manual preview
JX-CD3003d
Brand: jWIN Pages: 13
TerraTec Aureon 7.1 FireWire Product Information preview
Aureon 7.1 FireWire
Brand: TerraTec Pages: 2
Zeck Audio Daisy VHF Owner'S Manual preview
Daisy VHF
Brand: Zeck Audio Pages: 35
DAC DA-113/HF User Manual preview
DA-113/HF
Brand: DAC Pages: 2
BCoda Coda One User Manual preview
Coda One
Brand: BCoda Pages: 7

Brands by name

Popular brands

Load more brands