manualshive.com logo in svg

Mitel SX-2000 EL, Information Manual

Discover everything you need to know about the Mitel SX-2000 EL with our comprehensive Information Manual. This essential manual is available for free download from manualshive.com, equipping you with all the necessary insights to maximize your experience with this cutting-edge product. Find it now and elevate your communication capabilities.

Share
Download
background image

SX-200 General Information Guide

22

Revision A

50003510

For computerized control and monitoring of Hotel/Motel functions, the system can interface to 
a property management system (PMS).

Hotel/Motel and Front Desk Terminal functions are mutually exclusive with Property 
Management System (PMS).

Assisted Living 

Mitel Networks 6451 Intelligent Dispatch is a PC software application that provides the ideal 
alarm messaging system for Assisted Living Centers with less than 250 rooms. The messaging 
system sends telephone, pull cord, and door alarms from extended care residents to 
wired/wireless telephones or pagers of the  nurses/caregiver. 

The nurses/caregivers can

•

Provide immediate care 24-hours a day

The management can

•

Provide a discrete alarm system

•

Provide alarm logs

•

Ensure constant supervision

•

Increase staff efficiency

Mitel Networks 6451 Intelligent Dispatch ensures a superior alarm system by using Guardian; 
a safety net for the alarm messaging system. Guardian provides a constant watch and flags 
any malfunctions in the system and in the devices being monitored.

Mitel Networks 6451 Intelligent Dispatch supports the following alarm types:

•

Telephone Timer Alarm
The Telephone Timer alarm generates when the telephone of the resident is in the following 
states:

- 

Off-hook and nothing dialed in a specified time period

- 

Off-hook, incomplete dialing, and idle for a specified time period

- 

On hold for a specified time period

- 

Abnormal states (re-order tone) for a specified time period. 

The Telephone Timer alarm does not generate if the telephone is in a connected state or 
if the telephone is on-hook.

•

Emergency 911 Alarm

The Emergency 911 alarm generates when a resident or an attendant dials 911. This 
alarm notifies staff of an emergency, so the appropriate actions can take place. 

•

Assistance Required Alarm (pull cords)

The Assistance Required alarm generates when a pull cord is pulled. This alarm will remain 
active until the pull cord is put back to its normal state.

Summary of Contents for SX-2000 EL



































































































































































































































































Reviews:

No comments

Related manuals for SX-2000 EL

Panasonic 308 Quick User Manual preview
308
Brand: Panasonic Pages: 2
GE 9246 User Manual preview
9246
Brand: GE Pages: 96
Sprint 1930c Owner'S Manual preview
1930c
Brand: Sprint Pages: 44
BT Duet 550 User Manual preview
Duet 550
Brand: BT Pages: 2
Verizon T1960 User Manual preview
T1960
Brand: Verizon Pages: 55
Uniden D1780-2BT Series Guía Para El Usuario preview
D1780-2BT Series
Brand: Uniden Pages: 28
Steren TEL-009 Instruction Manual preview
TEL-009
Brand: Steren Pages: 19
ClearSounds iConnect A6BT Operating Manual preview
iConnect A6BT
Brand: ClearSounds Pages: 57
AT&T SPIRIT CS 2448 Instructor Manual preview
SPIRIT CS 2448
Brand: AT&T Pages: 124
Tekelec Business Analog Telephone User Manual preview
Business Analog Telephone
Brand: Tekelec Pages: 145
Vodavi Infinite Station User Manual preview
Infinite Station
Brand: Vodavi Pages: 38
Fortinet FortiFone FON-870i Quick Start Manual preview
FortiFone FON-870i
Brand: Fortinet Pages: 21
Spitfire Yealink T27G Quick Start Manual preview
Yealink T27G
Brand: Spitfire Pages: 2
Daewoo DTC-370 User Manual preview
DTC-370
Brand: Daewoo Pages: 33
Microlab H12W User Manual preview
H12W
Brand: Microlab Pages: 4
AKG HT 4000 Specifications preview
HT 4000
Brand: AKG Pages: 2
KAPSCH FreeStar User Manual preview
FreeStar
Brand: KAPSCH Pages: 78
Ricatech RMC100 User Manual preview
RMC100
Brand: Ricatech Pages: 64

Brands by name

Popular brands

Load more brands