manualshive.com logo in svg

Mitel SX-2000 EL, Information Manual

Discover everything you need to know about the Mitel SX-2000 EL with our comprehensive Information Manual. This essential manual is available for free download from manualshive.com, equipping you with all the necessary insights to maximize your experience with this cutting-edge product. Find it now and elevate your communication capabilities.

Share
Download
background image

Purchasable System Options

50003510

Revision A

203

PRI Card: D-Channel Backup

  Used for signaling to establish and maintain the circuit, and to 

send user data. D-channel Backup provides an alternate D-channel for calls related to NFAS. 
If the active D-channel fails, the system switches to the backup D-channel to support call 
processing. This functionality is mainly for North America. NFAS is required in order to program 
D-channel Backup. 

PRI Card: Remote LAN Access

  Provides LAN access to the wide area network (WAN) for 

both incoming and outgoing calls through LAN servers (for example, routers, bridges) using 
Mitel’s PRI Gateway interface.

PRI Card: Min/Max

   Controls the number of simultaneous incoming and outgoing calls. The 

level of control ranges from generic minimums and maximums on all calls to minimums and 
maximums for particular directory numbers.

PRI Card: Auto Min/Max

  Works in conjunction with Min/Max, and increases Min/Max 

configurations by providing time of day programming. Time of day programming allows you to 
have consistent traffic control without having to frequently reprogram Min/Max. You can 
program call control for an entire week, and the system will automatically change Min/Max 
settings based on the time of day and the day of the week. Min/Max is required in order to 
program Auto Min/Max.

Number of Links (0-8):

 Limits the number of  T1 type links from the PRI card and BCC III. This 

option is not required for links provided by the ISDN Network Gateway or a T1 trunk card. The 
total number of purchasable links and ISDN Network Gateway and T1 links cannot exceed 8.

Support Softkey Access to Voicemail:

 Enables voicemail softkeys on SUPERSET 4025, 

SUPERSET 4125, SUPERSET 4150, SUPERSET 420, and SUPERSET 430 telephones.  
Voicemail softkeys are supported by MITEL Express Messenger and by the DNIC-based 
NuPoint Messenger system.

Support 3DN and 4DN Set types:

 Enables the programming for SUPERSET 3DN and 

SUPERSET 4DN telephones.

Fax Tone Detection:

 Enables the system to recognize the FAX tone on incoming calls to the 

Automated Attendant. System Option 106, Automated Attendant, must be enabled as 
well.Maximum Devices: Displays the maximum number of user devices enabled, from 24 
through 768, in increments of 24.

Feature Level

:  Allows our customers to access selected features in the release. The Feature 

Level option (incremented for each Feature Level) is a purchasable MOSS option, number 102 
in the System Options and Timers, CDE Form 04. The Feature Level for LIGHTWARE 19, 
Release 2.0 is 3. The feature level is obtained with all new installs and software upgrades but 
not with software fixes.

Maximum Devices:

 Displays the maximum number of user devices enabled, from 24 through 

768.

Maximum ACD Agents:

 Displays the maximum number of ACD agents enabled, from 0 

through 100, in increments of 5.  This is the maximum number of agents that can be logged in 
concurrently.

Summary of Contents for SX-2000 EL



































































































































































































































































Reviews:

No comments

Related manuals for SX-2000 EL

Aastra Ascotel Office 135 Quick User Manual preview
Ascotel Office 135
Brand: Aastra Pages: 2
Yeastar Technology N1 Installation Manual preview
N1
Brand: Yeastar Technology Pages: 9
Octopus F620 HFA Operating Instructions Manual preview
F620 HFA
Brand: Octopus Pages: 103
Hello Kitty KT2017 Owner'S Manual preview
KT2017
Brand: Hello Kitty Pages: 11
way2call Hi-Phone Maestro Quick Reference Manual preview
Hi-Phone Maestro
Brand: way2call Pages: 2
American Audio Lab GO-210 TUTTI User Manual preview
GO-210 TUTTI
Brand: American Audio Lab Pages: 31
Technics st-ch510 Service Manual preview
st-ch510
Brand: Technics Pages: 14
Depaepe Telecom Premium 10 User Manual preview
Premium 10
Brand: Depaepe Telecom Pages: 2
VTech CS6214 User Manual preview
CS6214
Brand: VTech Pages: 38
VTech DS6111 User Manual preview
DS6111
Brand: VTech Pages: 40
Redback C 8890B Operating Instructions Manual preview
C 8890B
Brand: Redback Pages: 16
Moshi ionsuit Important Notes & Instructions preview
ionsuit
Brand: Moshi Pages: 7
Geemarc Amplidect Combi 295 Quick User Manual preview
Amplidect Combi 295
Brand: Geemarc Pages: 2
Innovaphone IP64 Product Data preview
IP64
Brand: Innovaphone Pages: 31
ASCOM Ascotel Office 35 Operating Instructions Manual preview
Ascotel Office 35
Brand: ASCOM Pages: 68
LG ACC97WK Specifications preview
ACC97WK
Brand: LG Pages: 1
LG ACC96R Instruction Booklet preview
ACC96R
Brand: LG Pages: 30
LG ACC96R Specifications preview
ACC96R
Brand: LG Pages: 1

Brands by name

Popular brands

Load more brands