manualshive.com logo in svg

Mitel SX-2000 EL, Information Manual

Discover everything you need to know about the Mitel SX-2000 EL with our comprehensive Information Manual. This essential manual is available for free download from manualshive.com, equipping you with all the necessary insights to maximize your experience with this cutting-edge product. Find it now and elevate your communication capabilities.

Share
Download
background image

Feature Description

50003510

Revision A

159

Handsfree Operation

This feature enables users of SUPERSET 4025,  SUPERSET 4125, SUPERSET 4150, 
SUPERSET 410, SUPERSET 420, SUPERSET 430, SUPERSET 3DN, and SUPERSET 4DN 
telephones to have a telephone conversation without lifting the handset.

Headset Mode Feature Key

You can equip SUPERSET telephones with headsets. This feature allows you to turn headset 
operation on and off with a feature key. SUPERSET 401+ and SUPERSET 4001 telephones 
do not support this feature

Headset Operation

SUPERSET telephones can be equipped with headsets. The headset user answers incoming 
calls by pressing the line select key or the SPEAKER ON/OFF key and hangs up by pressing 
the cancel key or hangup softkey.

Customers using the dedicated headset jack on SUPERSET 4015, SUPERSET 4025, 
SUPERSET 4125, or SUPERSET 4150 telephones will automatically go to headset mode when 
a non-amplified headset connects to the dedicated headset jack of that telephone.

Users of SUPERSET 4025 (Rev level G.1 or greater), SUPERSET 4125 (Rev level C.1 or 
greater) and SUPERSET 4150 (Rev level G.1 or greater) telephones can answer a call with 
the handset while the telephone is in headset mode. This allows a person to answer a call 
quickly, when limited time does not allow the user to put a headset on.  These telephones also 
support a single key toggle (the Handset Mute key) between the handset and the headset 
receivers while the set is in the talk state.

The user can combine headset operation with the Auto-Answer feature for complete handsfree 
operation. Auto-Answer is available to all SUPERSET telephones (excluding SUPERSET 4090, 
SUPERSET 401, and SUPERSET 4001 telephones) when the telephone is in headset mode. 
Headsets used with SUPERSET 400 series telephones must be externally powered (amplified). 
Headset operation is not supported on the SUPERSET 4001 telephone.

Headset Operation (Amplified Headset)

You can equip SUPERSET telephones (excluding the SUPERSET 4001 telephone) with 
amplified (externally powered) headsets instead of handsets. You answer incoming calls by 
pressing the line select key or the SPEAKER ON/OFF key and hang up by pressing the CANCEL 
key or HANGUP softkey. You can combine headset operation with the auto-answer feature for 
complete handsfree operation.

Headset User Control

The SUPERSET 4000 series sets have a separate headset jack, so the handset and headset 
can both be plugged in. When a headset is plugged in, the set directs the speech path to the 
headset and disables the handset microphone. This feature is controlled through either a feature 
access code or feature key. To restore to handset operation,  you separate the quick-disconnect 
connector or unplug the headset from the dedicated headset jack.

Summary of Contents for SX-2000 EL



































































































































































































































































Reviews:

No comments

Related manuals for SX-2000 EL

Panasonic KX-TA308 Manual De Instalación preview
KX-TA308
Brand: Panasonic Pages: 268
Ace ACE.BOIL Instructions Manual preview
ACE.BOIL
Brand: Ace Pages: 13
jablotron SP-02 Manual preview
SP-02
Brand: jablotron Pages: 2
Aastra Meridian 9216 (French) Specifications preview
Meridian 9216
Brand: Aastra Pages: 2
Fortinet FortiVoice 50E6 Quick Start Manual preview
FortiVoice 50E6
Brand: Fortinet Pages: 22
Uniden TRU 5865 Series Manual D'Utilisation preview
TRU 5865 Series
Brand: Uniden Pages: 60
ESI ORIGINAL IVX Installation Manual preview
ORIGINAL IVX
Brand: ESI Pages: 114
Topcom BUTLER 3501 User Manual preview
BUTLER 3501
Brand: Topcom Pages: 28
Valcom Syn-Apps VIP-801A-SA Quick Manual preview
Syn-Apps VIP-801A-SA
Brand: Valcom Pages: 2
AKG HT 4000 Specifications preview
HT 4000
Brand: AKG Pages: 2
Topcom Allure 400 User Manual preview
Allure 400
Brand: Topcom Pages: 80
auna multimedia 10029104 Instructions Manual preview
10029104
Brand: auna multimedia Pages: 9
Witech WT-3020 Operation Manual preview
WT-3020
Brand: Witech Pages: 24
Telstra Slim Touch 9650 User Manual preview
Slim Touch 9650
Brand: Telstra Pages: 52
Aastra MERIDIAN M5316 User Manual preview
MERIDIAN M5316
Brand: Aastra Pages: 16
Fender Passport Event Series 2 Owner'S Manual preview
Passport Event Series 2
Brand: Fender Pages: 44
GE 28811FE2 Specifications preview
28811FE2
Brand: GE Pages: 2
Excelltel PH201-D User Manual preview
PH201-D
Brand: Excelltel Pages: 20

Brands by name

Popular brands

Load more brands