manualshive.com logo in svg

Mitel SX-2000 EL, Information Manual

Discover everything you need to know about the Mitel SX-2000 EL with our comprehensive Information Manual. This essential manual is available for free download from manualshive.com, equipping you with all the necessary insights to maximize your experience with this cutting-edge product. Find it now and elevate your communication capabilities.

Share
Download
background image

SX-200 General Information Guide

174

Revision A

50003510

Multicall Line:

 A Multicall Line is an appearance of one extension number on two or more 

telephones. This extension number can be for another SUPERSET telephone or an 
industry-standard telephone.When one appearance of a Multicall Line is in use, the other 
appearances are still available to make or answer calls.

- 

Call Direction, Ring and Secretarial Variants can be programmed independently for each 
appearance.

- 

There can be up to 31 appearances of any one Multicall Line on a given SUPERSET 
telephone.

Direct Trunk Select (DTS) Line:

 A DTS Line operates like a Key Line, but it directly accesses 

a specified dedicated CO trunk. It can be used for incoming and outgoing calls. For further 
information see Direct Trunk Select. The DTS trunk can appear on up to 32 SUPERSET 
telephones.

- 

There can be only one appearance of any one Direct Trunk Select Line on a SUPERSET 
telephone.

- 

Direction and Ring Variants can be programmed independently for each appearance. The 
direction variant allows control of the type of trunk call, incoming or outgoing or both.

- 

The user can transfer calls on this line to other extensions.

- 

DTS outgoing calls bypass ARS. 

- 

DTS calls use the SMDR feature if enabled.

Private Line:

 A Private Line accesses a dedicated CO trunk directly. As operating TELCOs 

often provide a less expensive rate for trunks connected to private trunk lines SUPERSET 
telephones accommodate this type of operation. The user can transfer established calls on this 
line only to other SUPERSET telephones that have an appearance of the line, using privacy 
release.

- 

Personal Outgoing Line

This line is an outgoing-only line that allows the user to make an outgoing call without making 
the set busy to incoming calls.

- 

A Personal Outgoing Line has no extension number associated with it. 

- 

There can only be one Personal Outgoing Line per SUPERSET telephone.

BLF/DSS Line:

 This line type is used by two distinct features; Busy Lamp Field (BLF), and 

optionally Direct Station Select (DSS). A BLF is an appearance of a station, SUPERSET, logical 
line or trunk. The LED indicator indicates the state of the BLF appearance (Idle, Busy, DND). 
A DSS key is a BLF appearance (of a station, SUPERSET, or logical line), associated with the 
key.   

- 

A DSS key cannot be associated with a trunk BLF appearance.

Line Appearance Variants

Through CDE, the seven line types can be programmed to control call direction and ringing. 
Multicall Lines can also be programmed as Secretarial Lines.

Summary of Contents for SX-2000 EL



































































































































































































































































Reviews:

No comments

Related manuals for SX-2000 EL

Xblue Networks SP2014 Manual preview
SP2014
Brand: Xblue Networks Pages: 60
Xblue Networks X16 Quick Start Manual preview
X16
Brand: Xblue Networks Pages: 2
Xblue Networks X-50 Installation Manual preview
X-50
Brand: Xblue Networks Pages: 260
Xblue Networks X16 Manual preview
X16
Brand: Xblue Networks Pages: 2
Panasonic KX-TD816JT User Manual preview
KX-TD816JT
Brand: Panasonic Pages: 242
Teledex iPhone 200 series Specification Sheet preview
iPhone 200 series
Brand: Teledex Pages: 1
TRIGA TR-FFT Installation & Operation Manual preview
TR-FFT
Brand: TRIGA Pages: 33
Telstra Slimline 25 User Manual preview
Slimline 25
Brand: Telstra Pages: 6
switel DC51 series Operating Instructions Manual preview
DC51 series
Brand: switel Pages: 93
Binatone SYMPHONY 3325 User Manual preview
SYMPHONY 3325
Brand: Binatone Pages: 2
Ciro Cybercharger Quick Start Manual preview
Cybercharger
Brand: Ciro Pages: 2
Topcom Butler 130 Operating Manual preview
Butler 130
Brand: Topcom Pages: 33
Contec IPC-CDD-02 User Manual preview
IPC-CDD-02
Brand: Contec Pages: 15
Agent Headsets Agent EHS 550 Setup Manual preview
Agent EHS 550
Brand: Agent Headsets Pages: 1
Pro-Ject Audio Systems Box Design BT Box S2 Instructions For Use Manual preview
Box Design BT Box S2
Brand: Pro-Ject Audio Systems Pages: 6
BT Diverse 2015 User Manual preview
Diverse 2015
Brand: BT Pages: 70
Everpure XC Filter Cartridge EV9613-09 Specification Sheet preview
XC Filter Cartridge EV9613-09
Brand: Everpure Pages: 2
Furuno FS-2570 Technical Information preview
FS-2570
Brand: Furuno Pages: 67

Brands by name

Popular brands

Load more brands