manualshive.com logo in svg

Mitel SX-2000 EL, Information Manual

Discover everything you need to know about the Mitel SX-2000 EL with our comprehensive Information Manual. This essential manual is available for free download from manualshive.com, equipping you with all the necessary insights to maximize your experience with this cutting-edge product. Find it now and elevate your communication capabilities.

Share
Download
background image

SX-200 General Information Guide

148

Revision A

50003510

Data: DTRX Help

The Data Transceiver (DTRX) provides on-line help.

Data: DTRX Hotline

A dataset can be programmed to connect automatically to a predetermined destination when 
a user originates a DTRX data call.

Data: DTRX Messages

The Data Transceiver (DTRX) provides a number of messages to inform the user of call 
progress and error conditions.

Daylight Savings Time Adjustment

This feature allows you to program the system to automatically set the system clock

•

ahead for daylight savings time

•

back for standard time.

You program the month, day, and hour of the time changes, and the length of the time 
adjustment through CDE each year. The system automatically performs the time changes. A 
system reset is not required for a time change to take effect.

Device Interconnection Control

The Device Interconnection Control feature provides a means of disallowing connection 
between devices of different types. The feature is primarily intended to control trunk 
interconnections but applies to other devices as well. This is intended to provide a method of 
meeting interconnection restrictions imposed by various regulatory authorities. The checks 
apply when a device calls another device, when a transfer (supervised or unsupervised) is 
attempted and when the console attempts to perform operations on devices.

See Flash Control for details on controlling the ability of extensions to flash when extensions 
are involved with trunk calls.

Dial Tone Disable

Assigning this feature to a dial-in trunk suppresses dial tone on an incoming trunk call. If this 
feature is assigned to an extension, the extension does not receive dial tone when dialing is 
initiated.

Dial Tone - Discriminating

An extension that has a feature enabled that prevents calls from ringing the extension hears a 
distinct dial tone (350/440 Hz, 400 ms on, 100 ms off for six cycles, followed by continuous 
tone) when going off-hook to make a call. These features include Do Not Disturb, Call 
Forwarding - Always, and Call Forwarding - I Am Here.

Summary of Contents for SX-2000 EL



































































































































































































































































Reviews:

No comments

Related manuals for SX-2000 EL

Garmin FUSION Apollo MS-WB670 Owner'S Manual preview
FUSION Apollo MS-WB670
Brand: Garmin Pages: 44
KANDA EKN-2464 Installation & Maintenance Manual preview
EKN-2464
Brand: KANDA Pages: 176
Safeline SL6+ Manual preview
SL6+
Brand: Safeline Pages: 44
HK Audio HK2005 Service Documents preview
HK2005
Brand: HK Audio Pages: 20
W. A. Production Sphere Comp Manual preview
Sphere Comp
Brand: W. A. Production Pages: 5
Uniden D3580-3 User Manual preview
D3580-3
Brand: Uniden Pages: 28
DAC DA-113/HF User Manual preview
DA-113/HF
Brand: DAC Pages: 2
BCoda Coda One User Manual preview
Coda One
Brand: BCoda Pages: 7
invotel SX8400 Specification preview
SX8400
Brand: invotel Pages: 2
THOMSON SAPHIR TH-052DRB User Manual preview
SAPHIR TH-052DRB
Brand: THOMSON Pages: 24
Bridgesecure Technologies BridgeSecure Quick Start Manual preview
BridgeSecure
Brand: Bridgesecure Technologies Pages: 4
LENCO MDV-15 Instruction Manual preview
MDV-15
Brand: LENCO Pages: 24
Aiphone GF-1DK Operation Manual preview
GF-1DK
Brand: Aiphone Pages: 4
BellSouth BS5822 User Manual preview
BS5822
Brand: BellSouth Pages: 47
Aristel AV 32A Installation Manual preview
AV 32A
Brand: Aristel Pages: 50
Splicecom Yealink T3 Series Quick Reference Manual preview
Yealink T3 Series
Brand: Splicecom Pages: 9
Icom IC-125 Instruction Manual preview
IC-125
Brand: Icom Pages: 12
Panasonic KX-TG1070HK Specifications preview
KX-TG1070HK
Brand: Panasonic Pages: 2

Brands by name

Popular brands

Load more brands