manualshive.com logo in svg

Mitel SX-2000 EL, Information Manual

Discover everything you need to know about the Mitel SX-2000 EL with our comprehensive Information Manual. This essential manual is available for free download from manualshive.com, equipping you with all the necessary insights to maximize your experience with this cutting-edge product. Find it now and elevate your communication capabilities.

Share
Download
background image

Peripherals

50003510

Revision A

95

Digital Line Monitor (DLM)

The Digital Line Monitor (DLM) is an interface used to record voice information from Mitel 
Networks DNIC-based digital telephones or consoles on an externally connected tape recorder 
(not included). The unit records calls from the associated telephone only. The unit is free 
standing and can be located on a desk or elsewhere within the building. The DLM is designed 
so that a SUPERSET telephone can be placed on top of it if desired.

Digital Line Monitor

MITEL Express Messenger Voice Mail

MITEL Express Messenger allows a single voice mail card to provide either two, four, six or 
eight voice mail ports to a system operating with LIGHTWARE 17 or greater software.

After a call is forwarded to voice mail from an extension, the caller’s calling line identification 
(CLID) and the forwarding extension number are passed to the Express Messenger system.

Mitel Express Messenger supports English (North American), French (North American), and 
Spanish (North American). Spanish prompts are supported with MEM Release 2.1 or greater. 
French prompts are supported with MEM Release 3.0 or greater.

Mitel Express Messenger supports Record a Call. This feature allows the user to record an 
internal or external two-party conversation at their set. The recording process can start 
automatically or manually

Auto Attendant Features

Open and Closed Greetings: The company greeting can be programmed to automatically 
change from open business hours to closed or after hours.

Temporary Greeting: A Company Greeting can be programmed for use over holidays or 
shutdowns that will automatically expire after a specified number of days.

Summary of Contents for SX-2000 EL



































































































































































































































































Reviews:

No comments

Related manuals for SX-2000 EL

GE 30524 Quick Start Manual preview
30524
Brand: GE Pages: 2
Samsung Vodafone SGH-L810V Service Manual preview
Vodafone SGH-L810V
Brand: Samsung Pages: 93
LENCO MDV-8 User Manual preview
MDV-8
Brand: LENCO Pages: 27
JabloCom JabloPhone GDP-04 User Manual preview
JabloPhone GDP-04
Brand: JabloCom Pages: 12
Safeline TTR Installation Manual preview
TTR
Brand: Safeline Pages: 32
dBTechnologies RW16 MS User Manual preview
RW16 MS
Brand: dBTechnologies Pages: 49
Grundig RBX 1-RF Service Manual preview
RBX 1-RF
Brand: Grundig Pages: 16
Topcom TS-6651 User Manual preview
TS-6651
Brand: Topcom Pages: 96
Uniden XCI-660 Instruction Manual preview
XCI-660
Brand: Uniden Pages: 52
Uniden DECT1725 Series Owner'S Manual preview
DECT1725 Series
Brand: Uniden Pages: 44
Northland V-TECH VSP600 Manual preview
V-TECH VSP600
Brand: Northland Pages: 7
MagicBox Colombo User Manual preview
Colombo
Brand: MagicBox Pages: 44
Gigaset C610A IP Manual preview
C610A IP
Brand: Gigaset Pages: 28
Grundig Varixx UMS 4401 SPCD Manual preview
Varixx UMS 4401 SPCD
Brand: Grundig Pages: 47
BT DECOR 300 User Manual preview
DECOR 300
Brand: BT Pages: 12
HC Telecom DS815 User Manual preview
DS815
Brand: HC Telecom Pages: 16
BT DIVERSE 5410 User Manual preview
DIVERSE 5410
Brand: BT Pages: 72
Reloop sPod PRO Instruction Manual preview
sPod PRO
Brand: Reloop Pages: 16

Brands by name

Popular brands

Load more brands