manualshive.com logo in svg

Mitel SX-2000 EL, Information Manual

Discover everything you need to know about the Mitel SX-2000 EL with our comprehensive Information Manual. This essential manual is available for free download from manualshive.com, equipping you with all the necessary insights to maximize your experience with this cutting-edge product. Find it now and elevate your communication capabilities.

Share
Download
background image

SX-200 General Information Guide

54

Revision A

50003510

Digital Line Card

 

•

 

The Digital Line Card (DLC) is a low power card with 12 Digital Network Interface Circuits 
(DNIC) per card. The Digital Line Card interfaces DNIC-based peripheral devices to the system 
through its Digital Network Interface Circuits (DNIC); the DNIC is a proprietary integrated circuit. 
DNIC devices include SUPERSET 4001, SUPERSET 4015 , SUPERSET 4025,  SUPERSET 
4125, SUPERSET 4150, SUPERSET 4090, SUPERSET 401+, SUPERSET 410, SUPERSET 
420, SUPERSET 430 telephones, Programmable Key Modules, DATASETs, 
SUPERCONSOLE 1000 Attendant Console, DMP Module, and SUPERSET 7000 Attendant 
Consoles.

LS/GS Trunk Card

  

•

  

The LS/GS Trunk card is a low power card that contains six loop start or ground start trunks 
(jumper-selectable) and six message registration inputs. The card may be installed in any digital 
peripheral slot. Facilities provided by the LS/GS Trunk Card include: Loop Start or Ground Start 
selectable by jumper, M and MM signaling leads (refer to the feature, Meter Pulse Collection), 
trunk activity indicated by LED (one per trunk), transient suppression on Tip, Ring, and signaling 
leads, and an alarm LED. 

LS/CLASS Trunk Card 

 

•

  

The LS/CLASSTrunk card interfaces eight trunk circuits to the system. LS is the acronym for 
Loop Start and CLASS is the acronym for Custom Local Area Signaling Services (allows the 
system to receive calling Line ID digits and CLASS name on incoming CLASS trunks). The 
LS/CLASS Trunk card can be installed into slots one to eight in a SX-200 rack mount cabinet 
or a SX-200 ML (FD) cabinet. The card is dependant on LIGHTWARE 19 Release 2 or greater 
software. The LS/CLASS Trunk card provides loop start operation, forward/reverse current 
detectors (polarity reversal, answer supervision), alarms and trunk activity indicated by an LED 
(a single LED for any circuit in use), CLASS signal reception, and transient suppression on Tip 
and Ring leads.

Direct Inward Dial (DID) Trunk Card

  

! 

The DID trunk card  is a high power card that contains six 1-way Direct Inward Dial circuits. 
The DID trunk allows incoming trunk calls to dial directly to an extension within the system 
without attendant intervention.

Off-Premise (OPS) Line Card 

•

The OPS line card is a low power card that interfaces the system to extensions which are part 
of the system, but are located in a different building from the PBX. It contains additional 
protection circuitry to protect the system from extraneous high voltages or induced currents 
that may appear on the line. Each OPS card has six circuits.   

COV Card

  

!

 

The COV card is a high power card that is required to interface to certain voicemail applications.

Note: 

The card is a high power card if a console is attached to a SX-200 LIGHT cabinet.

Summary of Contents for SX-2000 EL



































































































































































































































































Reviews:

No comments

Related manuals for SX-2000 EL

D-Link DWR-720 User'S Setup Manual preview
DWR-720
Brand: D-Link Pages: 2
VTech LS6195 Quick Start Manual preview
LS6195
Brand: VTech Pages: 2
Dickson WiZARD2.4 Manual preview
WiZARD2.4
Brand: Dickson Pages: 28
AUDIOLINE Oyster200 Operating Instructions Manual preview
Oyster200
Brand: AUDIOLINE Pages: 48
ION iAS01 Quick Start Manual preview
iAS01
Brand: ION Pages: 48
Daewoo AXW-217 Service Manual preview
AXW-217
Brand: Daewoo Pages: 35
Walker Ameriphone VCO Operating Instructions Manual preview
VCO
Brand: Walker Ameriphone Pages: 39
Devine WMD-IE User Manual preview
WMD-IE
Brand: Devine Pages: 15
Telstra Slim Touch 9650 User Manual preview
Slim Touch 9650
Brand: Telstra Pages: 52
Oakcastle HIFI200 Instruction Manual preview
HIFI200
Brand: Oakcastle Pages: 25
Kirk 3040 User Manual preview
3040
Brand: Kirk Pages: 21
GE GE29393 User Manual preview
GE29393
Brand: GE Pages: 21
GE FOLD 2-9180 User Manual preview
FOLD 2-9180
Brand: GE Pages: 2
GE Model 29318 User Manual preview
Model 29318
Brand: GE Pages: 2
GE Slimline 00021389 User Manual preview
Slimline 00021389
Brand: GE Pages: 2
GE Trimline 16258160 User Manual preview
Trimline 16258160
Brand: GE Pages: 2
GE Trimline 00007057 User Manual preview
Trimline 00007057
Brand: GE Pages: 2
GE Trimline 16017170 User Manual preview
Trimline 16017170
Brand: GE Pages: 2

Brands by name

Popular brands

Load more brands