manualshive.com logo in svg

Mitel SX-2000 EL, Information Manual

Discover everything you need to know about the Mitel SX-2000 EL with our comprehensive Information Manual. This essential manual is available for free download from manualshive.com, equipping you with all the necessary insights to maximize your experience with this cutting-edge product. Find it now and elevate your communication capabilities.

Share
Download
background image

SX-200 General Information Guide

168

Revision A

50003510

Automatic Wakeup:

 This feature allows the Attendant to enable or disable an automatic 

wakeup on a room phone from a PMS terminal.

Check in/out:

 When a guest checks in (PMS Check In), the room telephone is enabled to allow 

outgoing trunk calls. The attendant may restrict the room phone to internal calls, local calls, or 
long distance calls using the Outgoing Call Restriction feature described in the Attendant 
Console Guide. Upon check out (PMS Check Out), the phone is disabled from making calls 
and the PMS clears Message Register, Message Waiting, Do Not Disturb, and Wakeups from 
the guest room database.

Guest name:

 This feature allows the name of a guest to be associated with a room in the PMS. 

It is sent to the system, when a guest checks in, and is stored against the room extension.

Maid in room status: 

This feature allows the maid to change the room status (clean/dirty) from 

the room telephone. The Maid in room status is also indicated on the PMS terminal. This feature 
is functionally identical to that of the attendant room status, however the displaying and 
monitoring of room status is completely controlled from the PMS terminal.

Message registration of outgoing trunk calls:

 This feature provides the PMS with the number 

of trunk calls made from a room (local and long distance). A call-accounting device connected 
to the system monitors SMDR reports for long distance calls. The charge for these calls is 
automatically added to the guest’s bill at check out time. Call-costing equipment may be 
attached to the PMS to allow the PMS to handle call costing.

Message waiting:

 This feature allows the Attendant to enable or disable the Message Waiting 

Lamp on a room phone from a PMS terminal.

Confirm Wakeup by Offhook:

 This feature allows users of SUPERSET display telephones 

to acknowledge a wakeup by going offhook, instead of having to read the message and press 
a softkey.

Hotel/Motel - Room Condition

This feature indicates the current housekeeping condition of a guest room: Clean, Dirty, Out 
of service, or To be inspected. It can be set from the Attendant Console or the Front Desk 
Terminal. Some conditions can be set from the guest room telephone. For more information 
see Room Status Display and Maid in Room Status Display on. Room Condition can be 
displayed as part of the Room Status display on the SUPERSET display telephone.

Hotel/Motel - Room Occupancy

This feature indicates the current occupancy of a guest room. It can be set from the Attendant 
Console or the Front Desk Terminal. The four types of Room Occupancy are: Vacant, Occupied, 
Reserved, or Guaranteed. See Room Status Display.

Hotel/Motel - Room Search Screen

The Room Search Screen is accessed through the Room Search softkey. Room searches are 
based on Room Type, Room Number, and Room Status. Any search other than Room Type 

Summary of Contents for SX-2000 EL



































































































































































































































































Reviews:

No comments

Related manuals for SX-2000 EL

EasyPro PA10 Installation, Operating And Maintenance Instructions preview
PA10
Brand: EasyPro Pages: 8
BBK BKT-58P RU Telephone Equipment preview
BKT-58P RU
Brand: BBK Pages: 18
CEECO SSW-321-FP Service Manual preview
SSW-321-FP
Brand: CEECO Pages: 11
Newcont NTP-3422 Operating Instructions Manual preview
NTP-3422
Brand: Newcont Pages: 14
Hame 55454 Operation Instructions Manual preview
55454
Brand: Hame Pages: 26
Manta MM2040 TOUCHBOX User Manual preview
MM2040 TOUCHBOX
Brand: Manta Pages: 16
Uniden WXI377 Manuel Du Propriétaire preview
WXI377
Brand: Uniden Pages: 48
Sagem D30H User Manual preview
D30H
Brand: Sagem Pages: 64
Ultimate HTX-1000 Owner'S Manual preview
HTX-1000
Brand: Ultimate Pages: 12
Vivax BS-210 Instruction Manual preview
BS-210
Brand: Vivax Pages: 68
DAC DA-113/HF User Manual preview
DA-113/HF
Brand: DAC Pages: 2
BCoda Coda One User Manual preview
Coda One
Brand: BCoda Pages: 7
UCOM COCOON 8002 User Manual preview
COCOON 8002
Brand: UCOM Pages: 24
Sony Ericsson CAR100 User Manual preview
CAR100
Brand: Sony Ericsson Pages: 2
Yealink W80B User Manual preview
W80B
Brand: Yealink Pages: 56
Uniden DXI8560-2 - DXI Cordless Phone Manual D'Utilisation preview
DXI8560-2 - DXI Cordless Phone
Brand: Uniden Pages: 20
Radio Shack ET-3504 Owner'S Manual preview
ET-3504
Brand: Radio Shack Pages: 16
TechMatte amFilm GLS2 Installation Manual preview
amFilm GLS2
Brand: TechMatte Pages: 2

Brands by name

Popular brands

Load more brands