manualshive.com logo in svg

Mitel SX-2000 EL, Information Manual

Discover everything you need to know about the Mitel SX-2000 EL with our comprehensive Information Manual. This essential manual is available for free download from manualshive.com, equipping you with all the necessary insights to maximize your experience with this cutting-edge product. Find it now and elevate your communication capabilities.

Share
Download
background image

SX-200 General Information Guide

178

Revision A

50003510

The ISDN Network Gateway interfaces the following SX-200 peripheral devices with the ISDN 
network:

•

Attendant consoles

•

SUPERSET telephone sets

•

Industry-standard telephone sets.

Moving Stations and SUPERSET Telephones

This feature allows extensions to be moved easily from one circuit to another. Previous 
programming for the extension, such as name, COR, and COS, is preserved and moved with it.

Multi-Attendant Positions

The system can handle multiple attendant consoles, giving unique hold slots to each attendant. 
Incoming trunk calls can be programmed to appear at all consoles, or specific console(s). 
Similarly, Extension Dial 0 calls, Priority Dial 0 calls, Intercept To Attendant calls, can be 
programmed to appear at all consoles, or at a specific console(s).

Any console in a particular tenant group can switch that tenant group to Night Service or to Day 
Service. See Attendant Night/Day Switching.  Also see Recall, and Attendant Console LDN 
Keys,  Attendant Transparent Multi-Console Operation and Tenanting.

Music-on-Hold (MOH)

A customer-provided music source can be connected to the system via a Music-on-Hold/Pager 
Module on the Universal card or on the Music-on-Hold/Pager Module via a DNIC port. 
Music-on-Hold can be used with Campon, Hold, Universal Call Distribution (UCD), ACD, and 
other features.

Each tenant of the system can also have its own Music-on-Hold source through a DMP unit 
that is connected to a DNIC port. Each DMP unit is accessed by a directory number programmed 
in its tenant group.  Up to 76 Music-On-Hold sources can be programmed (75, for the 25 tenants 
in Day, Night 1 and Night 2 service, and the system source).

Use of the Music-on-Hold feature may require, under applicable copyright or other provincial, 
local, state and/or federal rules, regulations and/or statutes, that you obtain a licence from the 
local performing rights society or copyright owner before you can provide music on hold to 
telephone users. Contact your music supplier for more information.

Music from an ONS Source

A customer-provided ONS music source can be connected to the system via an ONS port, 
which provides a cost-saving alternative to music from DMP and Music-on-Hold/Pager sources. 
Music from an ONS Source can be used with Campon, Hold, Universal Call Distribution (UCD), 
ACD, and other features. This feature also supports system tenants. Use of the Music from an 
ONS Source feature may require, under applicable copyright or other provincial, local, state 
and/or federal rules, regulations and/or statutes, that you obtain a licence from the local 
performing rights society or copyright owner before you can provide music on hold to telephone 
users. Contact your music supplier for more information.

Summary of Contents for SX-2000 EL



































































































































































































































































Reviews:

No comments

Related manuals for SX-2000 EL

Samsung SMT-i6010 Self Help Manual preview
SMT-i6010
Brand: Samsung Pages: 2
Samsung SMT-i5343 Quick User Manual preview
SMT-i5343
Brand: Samsung Pages: 3
Onn ONA17AA015 Product Manual preview
ONA17AA015
Brand: Onn Pages: 11
Aiwa XR-X7 Operating Instructions Manual preview
XR-X7
Brand: Aiwa Pages: 20
Samson QV Owner'S Manual preview
QV
Brand: Samson Pages: 19
Tempo Fitness DSTS2 Operating Instructions Manual preview
DSTS2
Brand: Tempo Fitness Pages: 6
Sylvania STID991 User'S Manual And Operating Instructions preview
STID991
Brand: Sylvania Pages: 2
Uniden XCI-660 Instruction Manual preview
XCI-660
Brand: Uniden Pages: 52
Uniden DECT1725 Series Owner'S Manual preview
DECT1725 Series
Brand: Uniden Pages: 44
Northland V-TECH VSP600 Manual preview
V-TECH VSP600
Brand: Northland Pages: 7
YA WOODSTOCK Quick Start Manual preview
WOODSTOCK
Brand: YA Pages: 2
DAPAudio D1333 Manual preview
D1333
Brand: DAPAudio Pages: 12
Huawei FP2025 User Manual preview
FP2025
Brand: Huawei Pages: 11
LG LG-RD2710 User Manual preview
LG-RD2710
Brand: LG Pages: 75
LG LG-T300 User Manual preview
LG-T300
Brand: LG Pages: 138
LG LG-TM220 Operating Manual preview
LG-TM220
Brand: LG Pages: 36
LG LG-E465g User Manual preview
LG-E465g
Brand: LG Pages: 46
LG LG-RD3470 User Manual preview
LG-RD3470
Brand: LG Pages: 21

Brands by name

Popular brands

Load more brands