Disclaimers
Warranty
7 - 2
No agent, employee, or representative of Mindray DS USA, Inc. has any authority to bind
Mindray DS USA, Inc. to any affirmation, representation, or warranty concerning its
products, and any affirmation, representation or warranty made by any agent, employee, or
representative shall not be enforceable by buyer.
This warranty is expressly in lieu of any other express or implied warranties, including any
implied warranty or merchantability or fitness, and of any other obligation on the part of the
seller.
Damage to any product or parts through misuse, neglect, accident, or by affixing any non-
standard accessory attachments or by any customer modification voids this warranty.
Mindray DS USA, Inc. makes no warranty whatever in regard to trade accessories, such
being subject to the warranty of their respective manufacturers.
A condition of this warranty is that this equipment or any accessories which are claimed to
be defective be returned when authorized, freight prepaid to Mindray DS USA, Inc.,
Mahwah, New Jersey 07430. Mindray DS USA, Inc. shall not have any responsibility in the
event of loss or damage in transit.
Calibration may be performed without the need to disassemble the instrument. It is the
responsibility of the purchaser to perform calibration as necessary, in accordance with the
instructions provided in this manual.
7.2
Disclaimers
7.2.1
Product Improvements
Mindray DS USA, Inc. retains the right to modify the machine and/or operating instructions
without prior notification. These operating instructions explain all features of the
system and are correct at time of manufacture. Instructions and models produced at a later
stage, may contain improvements or modifications that were not included in previous
models.
7.3
Manufacturer’s Responsibility
The effects on safety, reliability, and performance of the equipment are the manufacturer’s
responsibility only if:
a.
assembly operations, extensions, readjustments, modifications or repairs are carried
out by authorized personnel; and
b.
the electrical installation of the relevant room complies with the appropriate
requirements; and
c.
the equipment is used in accordance with the instructions for use
Summary of Contents for Datascope AS 3000
Page 2: ...AS Datascope Anesthesia Delivery System Service Manual...
Page 9: ...Table of Contents vi 0070 10 0683 AS3000 Service Manual This page intentionally left blank...
Page 13: ...Introduction Notes x 0070 10 0683 AS3000 Service Manual This page intentionally left blank...
Page 179: ...0070 10 0683 Rev K August 8 2014...
