Mercury 2010 Milan Owner'S Manual Download Page 24

Page: 24 / 330

Autounlock

This feature automatically unlocks all vehicle doors when the driver’s
door is opened within 10 minutes of the ignition being turned off.

1. To disable/enable autounlock
feature, select this function from the
SETUP menu for the current display
mode.

2. Press RESET to turn autounlock
on or off.

Blind spot system (if equipped)

The blind spot information system is designed to assist the driver by
monitoring the side areas on both sides of the vehicle.

1. Select this function from the
SETUP menu to disable the system.

2. Press RESET to turn blind spot
off or on.

Cross traffic alert system (if equipped)

The cross traffic alert system is designed to assist the driver by
monitoring the areas toward the rear of the vehicle.

1. Select this function from the
SETUP menu to disable/enable the
system.

2. Press RESET to cross traffic off
or on.

Park aid (Reverse sensing system) (if equipped)

This feature sounds a warning tone to warn the driver of obstacles near
the rear bumper, and functions only when R (Reverse) gear is selected.

1. Select this function from the
SETUP menu to disable the reverse
sensing system feature.

2. Press RESET to turn the rear
park assist off. When R (Reverse)
gear is selected, PARK AID OFF will be displayed.

Instrument Cluster

2010 Milan

(mln)

Owners Guide, 3rd Printing
USA

(fus)

Summary of Contents for 2010 Milan











































































































































































































































































































































Search results

Summary of Contents for 2010 Milan

Reviews:

Related manuals for 2010 Milan

Brands by name

Popular brands

Mercury 2010 Milan, Owner'S Manual

Search results

Summary of Contents for 2010 Milan

Reviews:

Related manuals for 2010 Milan

Brands by name

Popular brands