Mercury 2010 Milan Owner'S Manual Download Page 13 | Manualshive

Page: 13 / 330

background image

Solid illumination after the engine is started indicates the On Board
Diagnostics System (OBD-II) has detected a malfunction. Refer to

On

board diagnostics (OBD-II)

in the

Maintenance and Specifications

chapter. If the light is blinking, engine misfire is occurring which could
damage your catalytic converter. Drive in a moderate fashion (avoid
heavy acceleration and deceleration) and contact your authorized dealer
as soon as possible.

WARNING:

Under engine misfire conditions, excessive exhaust

temperatures could damage the catalytic converter, the fuel

system, interior floor coverings or other vehicle components, possibly
causing a fire.

Brake system warning light:

To

confirm the brake system warning
light is functional, it will
momentarily illuminate when the
ignition is turned to the on position
when the engine is not running, or in a position between on and start, or
by applying the parking brake when the ignition is turned to the on
position. If the brake system warning light does not illuminate at this
time, contact your authorized dealer as soon as possible. Illumination
after releasing the parking brake indicates low brake fluid level or a
brake system malfunction. Contact your authorized dealer as soon as
possible.

WARNING:

Driving a vehicle with the brake system warning

light on is dangerous. A significant decrease in braking

performance may occur. It will take you longer to stop the vehicle.
Contact your authorized dealer as soon as possible. Driving extended
distances with the parking brake engaged can cause brake failure and
the risk of personal injury.

Anti-lock brake system:

If the

ABS light stays illuminated or
continues to flash, a malfunction has
been detected. Contact your
authorized dealer as soon as
possible. Normal braking is still functional unless the brake warning light
also is illuminated.

P

!

BRAKE

ABS

Instrument Cluster

13

2010 Milan

(mln)

Owners Guide, 3rd Printing
USA

(fus)

«
...
11
12
13
14
15
...
»

Summary of Contents for 2010 Milan











































































































































































































































































































































Reviews:

No comments

Related manuals for 2010 Milan

Brand: Aries Pages: 3

Brand: Trailboss Pages: 5

Brand: Thule Pages: 8

Brand: Phonocar Pages: 6

10-8002-C11670C

Brand: Saleen Pages: 17

Brand: Ford Pages: 368

Brand: Yakima Pages: 13

Brand: PUTCO Pages: 2

Brand: TrailFX Pages: 2

Even Brake 9400

Brand: Roadmaster Pages: 20

Brand: Flash Cover Pages: 2

Brand: Metra Electronics Pages: 10

PRIME DESIGN HRR-E-PM52

Brand: Safe Fleet Pages: 12

Brand: AEV Pages: 16

Brand: BMW Pages: 177

Brand: Volvo Pages: 3

Brand: Navman Pages: 10

BUSHMAN 15L ROADIE fridge Base console

Brand: Cruiser Consoles Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands