Mercury 2010 Milan Owner'S Manual Download Page 16

Page: 16 / 330

Turn signal:

Illuminates when the

left or right turn signal or the
hazard lights are turned on. If the
indicators flash faster, check for a burned out bulb.

High beams:

Illuminates when the

high beam headlamps are turned on.

Key-in-ignition warning chime:

Sounds when the key is left in the

ignition in the off or accessory position and the driver’s door is opened.

Headlamps on warning chime:

Sounds when the headlamps or parking

lamps are on, the ignition is off (the key is not in the ignition) and the
driver’s door is opened.

Parking brake on warning chime:

Sounds when the parking brake is

engaged and the vehicle is driven. If the warning remains after the
parking brake is disengaged, contact your authorized dealer as soon as
possible.

Message center activation chime:

Sounds when some messages

appear in the message center display for the first time.

Turn signal on warning chime:

Sounds when the turn signal has been

left on for an extended period of time.

Perimeter alarm warning chime:

Sounds when using a key to unlock

the driver’s doors and the perimeter alarm is armed.

Instrument Cluster

2010 Milan

(mln)

Owners Guide, 3rd Printing
USA

(fus)

Summary of Contents for 2010 Milan











































































































































































































































































































































Search results

Summary of Contents for 2010 Milan

Reviews:

Related manuals for 2010 Milan

Brands by name

Popular brands

Mercury 2010 Milan, Owner'S Manual

Search results

Summary of Contents for 2010 Milan

Reviews:

Related manuals for 2010 Milan

Brands by name

Popular brands