Mercury 2010 Milan Owner'S Manual Download Page 45

Page: 45 / 330

Radio Display

Condition

Action Required

NO TEXT

Category information

not available.

Category information

not available at this

time on this channel.

The system is working

properly.

NO SIGNAL

Loss of signal from

the SIRIUS

威

satellite

or SIRIUS

威

tower to

the vehicle antenna.

You are in a location

that is blocking the

SIRIUS

威

signal (i.e.,

tunnel, under an

overpass, dense foliage,

etc). The system is

working properly. When

you move into an open

area, the signal should

return.

UPDATING

Update of channel

programming in

progress.

No action required. The

process may take up to

three minutes.

CALL SIRIUS

威

1–888–539–7474

Satellite service has

been deactivated by

SIRIUS

威

satellite

radio.

Call SIRIUS

威

1–888–539–7474 to

re-activate or resolve

subscription issues.

NAVIGATION SYSTEM (IF EQUIPPED)

Your vehicle may be equipped with a navigation system. Refer to the

Navigation System

supplement for further information.

SYNC

姞

(IF EQUIPPED)

Your vehicle may be equipped with SYNC

威

, a hands-free communications

and entertainment system with special phone and media features. For
more information, please refer to the

SYNC

威

supplement or to the

SYNC

威

section in the

Navigation System

supplement (if equipped).

Entertainment Systems

2010 Milan

(mln)

Owners Guide, 3rd Printing
USA

(fus)

Summary of Contents for 2010 Milan











































































































































































































































































































































Search results

Summary of Contents for 2010 Milan

Reviews:

Related manuals for 2010 Milan

Brands by name

Popular brands

Mercury 2010 Milan, Owner'S Manual

Search results

Summary of Contents for 2010 Milan

Reviews:

Related manuals for 2010 Milan

Brands by name

Popular brands