4. Turn the headlamp control to the autolamp position. The headlamps
will turn on.
5. Wait the desired amount of time for the exit delay you want (up to
three minutes), then turn the headlamps off.
See
Message center
in the
Instrument Cluster
section for more
information.
Fog lamp control (if equipped)
With the ignition on, the fog lamps
can be turned on when the
headlamp control is pulled toward
you and is in any of the following
positions:
•
Parking lamps
•
Low beams
•
Autolamps (when active)
The fog lamp indicator light will
illuminate when the fog lamps have been turned on. The fog lamps will
not operate when the high beams are active.
Daytime running lamps (DRL) (if equipped)
Turns the headlamps on with a reduced output.
To activate:
•
the ignition must be in the on position,
•
the headlamp control is in the off, autolamps or parking lamp position
and
•
the transmission must be out of the P (Park) position.
WARNING:
Always remember to turn on your headlamps at
dusk or during inclement weather. The Daytime Running Lamp
(DRL) system does not activate the tail lamps and generally may not
provide adequate lighting during these conditions. Failure to activate
your headlamps under these conditions may result in a collision.
Lights
57
2010 Milan
(mln)
Owners Guide, 3rd Printing
USA
(fus)
Summary of Contents for 2010 Milan
Page 324: ...Ford Extended Service Plan 324 ...
