MBO SVC 525C, Translation Of The Original Operating Manual, Page: 67 / 171

Sheeter SVC 525C 63
Operating and display elements, operating modes
Main switch
5 Operating and display elements, operating modes
5.1 Main switch
The main switch has the following properties:
• It disconnects the sheeter from the electrical supply.
• It disconnects the machines connected to the sheeter from the electrical
supply.
• It has only one OFF and one ON position, labeled 0 and I.
• It is equipped with a device that enables it to be locked in the OFF po-
sition (e.g. by a padlock).
1 Main switch OFF 2 Main switch ON
Illustration 23: Main switch
I
0
1
2
Switching off the main switch also switches off the heaters of the cutting
units.
After switching on the main switch, observe the necessary warm-up
phase of the heaters.