MBO SVC 525C, Translation Of The Original Operating Manual, Page: 129 / 171

Sheeter SVC 525C 125
Adjustment and operation
Adjusting the machine
1) Cut a chip-out (6).
2) Remove the suction hood (1).
3) Place chip-out on the knife edge.
4) On the covered area, open every second vacuum hole (4) by loosening
the locking pin (5).
5) Attach suction hood (1) to the upper cutting cylinder again.

The chip-out can now be suctioned on the upper cutting cylinder and
then be exhaust via the suction hood.
CAUTION!
Cutting hazard.
The cutting edges of the knives can cause cut injuries.
• Never touch the cutting edges of the knives.