MBO SVC 525C, Translation Of The Original Operating Manual, Page: 107 / 171

Sheeter SVC 525C 103
Adjustment and operation
Operation
8.2.3 Operating the sheeter in inching mode
How to proceed to operate the sheeter in inching mode:
Prerequisites These prerequisites must be fulfilled:
• The warm-up phase of one hour has been observed.
• The sheeter should be set up.
• The web has been fed in.
• The nip rollers are closed.
Starting inching Here's how to start inching mode:

Press and hold the <Inching> button (1).

Press and hold the <Inching> button (2).

A warning signal sounds and the sheeter moves at approx. 7 m/min.
Stopping inching Here's how to stop inching mode:

Release the <Inching> button (1).

Release the <Inching> button (2).

The sheeter stops.
1 <Inching> button 2 <Inching> remote control
Illustration 48: Inching the sheeter
1
2
• The sheeter can only be set up in inching mode.
• If the sheeter is ready for production, it can be also be operated in
inching mode to check the settings.
• Inching speed = approx. 7 m/min.