manualshive.com logo in svg

MBO SVC 525C, Translation Of The Original Operating Manual, Page: 170 / 171

Share
Download
MBO SVC 525C Translation Of The Original Operating Manual Download Page 170

166

Sheeter SVC 525C  

Disposal

Disposal/recycling

Here's how to proceed to dispose of/recycle the machine.

Prerequisites

These prerequisites must be fulfilled:

• Decommission the machine prior to disposal.

See chapter “10.2   Decommissioning”.

• Heed transport instructions.

See chapter “6   Transport, interim storage”.

Disposing of/

recycling the

machine

Here's how to dispose of/recycle the machine:

Separate machine parts and electrical components by type and dispose 
of them properly.

The machine is disposed of.

All parts, auxiliary materials, and operating materials of the machine:
•

Separate by type

•

Dispose of in accordance with local regulations, laws, and directives.

If you have any further questions regarding disposal, please contact the 
manufacturer!

Summary of Contents for SVC 525C












































































































































































Reviews:

No comments