MBO SVC 525C, Translation Of The Original Operating Manual, Page: 25 / 171

Sheeter SVC 525C 21
Basic safety instructions
Residual risks
2.5 Residual risks
A risk analysis with risk assessment was conducted for this machine in ac-
cordance with DIN EN ISO 12100:2010.
The construction and model of the machine based on this analysis corre-
sponds to the state of technology.
You can avoid residual risks by heeding and implementing these specifica-
tions:
• Safety messages on the machine.
• General safety instructions and special warnings in this operating man-
ual.
• Operating manual of the machine/system manufacturer.
• Operator directives.
The existing residual risks are listed in the following chapters according to
the various life phases of the machine.
2.5.1 Transport, interim storage
• Crushing hazard during transport of the machine and machine parts.
• Use of unsuitable fork lifts.
• Tipping machine parts during the unloading process.
• Insufficient properties and condition of the underfloor.
• Wrong interim storage
2.5.2 Set-up, commissioning
• Use of unsuitable fork lifts.
• Tipping machine parts during the installation process.
• Insufficient properties and condition of the underfloor.
• Improper alignment of the machine components.
• Hazardous voltage.
• Incorrect supply voltage
• Incorrect use of the sockets.
• Discharge currents greater than 10mA.
• Disconnected protective conductor connections.
• Dismounted protective devices.
• Tripping points due to connecting cables lying around.
• Operating the sheeter when it is cold.