150
Sheeter SVC 525C
Maintenance
Maintenance
9.4.4
Changing the knives of the cutting cylinder unit
9.4.4.1
Sliding knife block into service position
Here's how to proceed to slide the knife block.
Prerequisites
These prerequisites must be fulfilled:
• Protective hood and guard door are open.
• Main switch is switched off and secured.
• The electrotechnical regulations are heeded.
CAUTION!
Cutting hazard!
The blades of the knives can cause cut injuries.
•
Never touch the blade of the knives.
•
Be very careful when changing the knives.
•
Always change the knives and counter knives in pairs.
•
The knives and counter knives may not touch each other. Otherwise
there is a danger of damaging the cutting edges.
•
When lifting and lowering the suction hood, make sure not to damage
anything.
•
The knives may only be changed by specially trained personnel.
If you turn the knife and counter knife by 180°, you can use these twice.
Summary of Contents for SVC 525C
Page 1: ...Sheeter Translation of the original operating manual Keep for future reference SVC525C ...
Page 48: ...44 Sheeter SVC 525C Product description Technical data ...
Page 66: ...62 Sheeter SVC 525C Structure and function Protective devices ...
Page 90: ...86 Sheeter SVC 525C Transport interim storage Interim storage of the machine ...