Sheeter SVC 525C
143
Maintenance
Operational maintenance
Cleaning the ma-
chine
Here's how to clean the machine:
Suck up the dirt.
Use a brush for hard-to-reach areas.
Wipe down the surfaces using a dry cloth.
Do not use any chemically aggressive washing and cleansing agents!
The machine is clean.
9.3.3
Cleaning the optical sensors
Here's how to proceed to clean the optical sensors.
Prerequisites
These prerequisites must be fulfilled:
• Main switch is switched off and secured.
• EMERGENCY STOP palm button is pressed.
Cleaning the optical
sensors
Here's how to clean the optical sensors:
Clean the optical elements of the sensors with a dry, lint-free cloth.
Optical sensors are clean.
•
Clean the machine at least once per week.
•
The dust layer must never exceed 1 mm (0.039 in.).
•
Never clean the machine using compressed air. (bearing damage)
•
Heavy contamination can impair the functioning of the machine.
The optical elements of the print mark sensor are blown out with com-
pressed air during operation.
•
The optical sensors of the machine get dirty during production due to
paper dust and printing powder.
•
They should therefore be cleaned after each job (daily).
Summary of Contents for SVC 525C
Page 1: ...Sheeter Translation of the original operating manual Keep for future reference SVC525C ...
Page 48: ...44 Sheeter SVC 525C Product description Technical data ...
Page 66: ...62 Sheeter SVC 525C Structure and function Protective devices ...
Page 90: ...86 Sheeter SVC 525C Transport interim storage Interim storage of the machine ...