MBO SVC 525C, Translation Of The Original Operating Manual, Page: 168 / 171

164 Sheeter SVC 525C
Decommissioning, storage
Storage
Shutting down the
machine
Here's how to shut down the machine:

Remove products, tools from the machine.

Clean and maintain machine.
See Chapter “9 Maintenance”.

The machine is temporarily shut down
10.2.2 Final decommissioning
Here's how to shut the machine down permanently.
Prerequisites These prerequisites must be fulfilled:
• Main switch is switched off.
• Electrical supply is disconnected.
• Compressed air supply is cut off.
Shutting down the
machine
permanently
Here's how to shut down the machine permanently:

Remove products, tools from the machine.

Dismantle the machine by following the installation steps in the opposite
sequence.

For transport, observe the instructions in Chapter “6 Transport, interim
storage”.

The machine is permanently shut down.
10.3 Storage
Here's how to proceed to store the machine.
Prerequisites These prerequisites must be fulfilled:
• Machine is shut down.
Storing the machine Here's how to store the machine:
Check the premises with respect to the temperature and humidity.
See chapter “3.2.8 Ambient conditions”.
The higher the humidity, the greater the danger of corrosion.

For long-term storage, measures for corrosion protection must be tak-
en.

Observe the specifications regarding the weight and size of the ma-
chine when selecting the premises.
See chapter “3.2 Technical data”

Use a suitable fork lift for transport.
See chapter “3.2.3 Shipping and transport data”.

Cover the machine with foil.

The machine is stored.
After a temporary shutdown, the machine must be commissioned again.
See chapter “7 Set-up, commissioning”