MBO SVC 525C, Translation Of The Original Operating Manual, Page: 123 / 171

Sheeter SVC 525C 119
Adjustment and operation
Adjusting the machine
8.4.12 Adjusting <Paper jam> sensor
Here's how to proceed to adjust the <Paper jam> sensor.
Prerequisites These prerequisites must be fulfilled:
• All smoothers and belts are adjusted.
Adjusting the sensor
Here's how to position the sensor for the paper jam:
1) Loosen the knurled screw (1).
2) Put the <Paper jam> sensor (2) in the desired position.
3) Tighten the knurled screw.

The <Paper jam> sensor is set.
1 Knurled screw 2 Sensor <Paper jam>
Illustration 61: Adjust <Paper jam> sensor.
1
2
The scan width of the sensor is set permanently to 130 mm and may
not be changed.
You can have the sensor look forward or backward, depending on the
side on which a jam will sooner form.
According to experience, the jam forms between the first infeed shaft
and the sensor.