MBO SVC 525C, Translation Of The Original Operating Manual, Page: 115 / 171

Sheeter SVC 525C 111
Adjustment and operation
Adjusting the machine
8.4.5 Adjusting the nip rollers on the second infeed shaft
Here's how to proceed to adjust the nip rollers.
Prerequisites These prerequisites must be fulfilled:
• The nip rollers on the first infeed shaft are adjusted.
• The nip rollers are closed on the first infeed shaft.
• The web has been inserted.
Here's how to adjust the nip rollers:
1) Loosen hexagon head screw (1).
2) Position the nip roller (3).
Both outside nip rollers should be placed at a distance of 5 - 6 cm from
the edge of the paper. Distribute the middle nip rollers evenly across the
remaining width.
3) Tip the clamping to the right until there is a gap (2) of approx. 2 - 3 mm
between the roller and clamping.
4) Tighten the hexagon head screw again.

The nip rollers are adjusted.
1 Hexagon head screw
2 Gap
3 Nip roller
Illustration 54: Adjust the nip rollers on the second infeed shaft.
1
2
3