MBO SVC 525C, Translation Of The Original Operating Manual, Page: 146 / 171

142 Sheeter SVC 525C
Maintenance
Operational maintenance
9.3.2.1 Recommendation of cleaning agents
Flat surfaces and
cavities
Suction clean or sweep out.
(no compressed air since danger of bearing damage).
For deposits that ad-
here to finished sur-
faces
Solvent-free cleansing agent.
Shafts and rollers MBO Binder GmbH & Co. KG recommends "Varn" cleansing agent with the
designation: "VM 111 or VWM Wash".
The "Varn“ company delivers to the printing industry worldwide.
Therefore, it cannot be excluded that in certain other countries different
designations are used.
Therefore, please use the respective order no. from the technical data
sheets of the "Varn“ company.
9.3.2.2 Cleaning the machine
Here's how to proceed to clean the machine.
Prerequisites These prerequisites must be fulfilled:
• Protective hood and guard door are open.
• Main switch is switched off and secured.
• Clean the machine at least 1 x per week.
• The dust layer must never exceed 1 mm (0.039 in.).
• Especially clean dirt (paper dust, printing powder, etc.) from moving
parts.
Be sure to follow the manufacturer's safety instructions.
Always release the web tension before switching off the main switch.
Otherwise the web may come unthreaded from the sheeter.