MBO SVC 525C, Translation Of The Original Operating Manual, Page: 162 / 171

158 Sheeter SVC 525C
Maintenance
Maintenance
9.4.6 Changing the nylon mat
Here's how to proceed to change the nylon mat.
Prerequisites These prerequisites must be fulfilled:
• Main switch is switched off and secured.
• The electrotechnical regulations are heeded.
• The knife block is in the service position.
Changing the nylon
mat
Here's how to change the nylon mat:
1) Loosen the clamping bar (2).
2) Loosen the nylon mat (1) from the shaft.
3) Loosen the wrapper bar (6).
4) Clean the shaft.
5) Bear the wrapper (3) around the wrapper bar (6) and attach to the knife
(7).
6) Glue nylon mat (1) to the shaft.
7) Fasten clamping bar (2).

The nylon mat is changed.
The nylon mat is fastened to the shaft with double-sided adhesive tape.
1 Nylon mat
2 Clamping bar
3 Wrapper
4 Area with "threads"
5 Area without "threads"
6 Wrapper bar
7 Knife
Illustration 80: Change the nylon mat.
}
}
}
1
7
2
6
1
3
4
5