41
ITALIANO
ENGLISH
SUOMI
Inconvenience
Cause
Remedy
Excessive vibration.
Breakage or excessive wear of blades and hammers.
Replace the worn or cracked pieces.
Blades or hammers blocked on pin.
Clean and grease the pins.
Inadequate balancing of rotor.
Check the weight of the of the blades/hammers block
Wear of rotor bearings.
Remove and replace bearings and seals.
Imperfect cut due to lowering of engine speed.
Belt tension insuf
fi
cient.
Regulate tension.
Belts excessively worn.
Replace belts.
Overheating of belts.
Incorrect tension of belts.
Check tension.
Transmission axis and rotor axis out of alignment.
Check alignment.
Overheating of bevel gear pair.
Lack of oil.
Add oil to proper level.
Oil depleted.
Replace.
Rapid wearing of blades or hammers.
Work position too low, blades touching ground.
Adjust height of rotor from ground.
Loss of oil from transmission, belt side.
Wear and breakage of oil seal.
Replace seal.
Deformation of the supports of the roller or wheels.
The supports of the roller and the wheels
Raise the machine from the ground when in reverse gear.
have undergone side stress.
Deformation of protective guards.
In order to assume the work position, the machine
The machine must be in the work position before touching
- from a raised position (transport) - has been
the material to be shredded.
lowered onto the material to be shredded.
4.9 INCONVENIENCES,
CAUSES
AND
REMEDIES
4.9 VIANETSINTÄTAULUKKO
Summary of Contents for GIRAFFA 160
Page 43: ...43 ITALIANO ENGLISH SUOMI...
