57
12/04
SPIDER MAX 500
B
11.2
Deletion of stored anomalies
After correcting the anomaly connect the diagnostic multi-
meter.
Select the menu from the ”DELETE ERRORS” function.
Press OK and follow the instructions.
After a test race, check for the anomaly recurrence.
For troubleshooting guide, refer to the corresponding chapter
sections.
Parameters
Immobilizer
Errors
Delete errors
Active diagnostics
CO calibration
Main 4/8
F. 16/b
The errors that can be detected by the autodiagnostic system may concern the following system circuits or central unit
sections:
- throttle valve position signal;
- room pressure signal;
- coolant temperature signal;
- Intake air temperature signal;
- Incorrect battery voltage;
- Injector and corresponding circuit;
- H.T. coil and corresponding circuit;
- Stepper motor and corresponding circuit;
- pump relay circuit;
- Fan relay circuit;
- RAM memory;
- ROM memory;
- EEPROM;
- Microprocessor
- Signal panel (signal for engine rpm - speed - unstable cycle).
The underlined anomalies always cause the engine to stop.
In all other cases, the engine continues running, managed by the data bases.
