108 12/04
SPIDER MAX 500
B
Lost synchronisations 1D
0
Lost synchronisations > 1D
0
TPS reset
YES
CO already calibrated
NO
R/O step difference
55
Atmospheric press . mm Hg
783.0
Parameters
3/3
Immobilizer
Errors
Delete errors
Active diagnostics
CO calibration
Reset TPS
Main 7/8
Check the
throttle stroke
Press OK to
start the TPS
reset
- Select the diagnostic multimeter
function from “TPS reset”.
- Make sure that the gas valve
control rests on the locking screw
(A).
- Making sure to retain this position,
confirm to start the TPS reset
procedure.
- Select the ”PARAMETERS”
function and make sure the TPS
reset “YES” is present.
Carry out the reset procedure in the following situations:
- when assembling the equipment for the first time
- when replacing the throttle body
- when replacing the injection central unit.
NOTE - Do not carry out the TPS reset procedure with a used throttle body as the valve wear and even
the smallest opening may change the air flow with respect to the calibration air flow.
