14
12/04
SPIDER MAX 500
A
4.1
Current time adjustment (TIME)
To adjust the current time press the mode button beside the message
TIME (in the Set-Up window) for at least 2 seconds. At this point the only
information displayed will be the current time (F. 11), blinking (f=1Hz,
duty=50%). A short pressure of the mode button allows changing the hour
value while a longer pressure (of at least 2 seconds) allows changing the
minutes (that will be then be blinking), in the same way described for the
hours. Press the button beside the EXIT function (for at least 2 seconds)
to go back to the Set-up menu.
Note 1: if the button is not pressed within 20 seconds from accessing
the adjustment menu, the system automatically goes back to the
standard operation mode.
Note 2: if the motorcycle engine is started (speed>0) after accessing
the adjustment menu, the system automatically goes back to the
standard operation mode.
4.
SET-UP MENU
This menu allows accessing a series of functions used to:
• Adjust the current time (TIME).
• Adjust the equipment backlight (BACKLIGHT).
• Adjust display contrast and display mode (DISPLAY).
• Indicate to the system that Oil service has been performed (OIL).
• Indicate to the system that the variator belt has been replaced (V.BELT).
F. 12 TIME adjustment
F. 11 Set-up menu
It is possible to access the Set-up menu only when the motorcycle is not in motion by pressing the mode button beside
the TOD function for around 2 seconds, until the Set-Up screen is displayed (F. 11). Then press again the mode button to
scroll the different functions until the needed function is displayed and press the button for around 2 seconds until the
adjustment mode appears. After the adjustment operations are over, press the button beside the EXIT function for at
least 2 seconds to go back to the standard operation mode.
Note 1: if the button is not pressed within 20 seconds from accessing the adjustment menu, the system
automatically goes back to the standard operation mode.
Note 2: if the motorcycle engine is started (speed>0) after accessing the adjustment menu, the system automatically
goes back to the standard operation mode.
Note 3: It is not possible to access the set-up menu when the “Trip memory” function is selected.
