7
ENGLISH
PRYHPHQWDWWKHSRLQWRISLQFKLQJ$EUDVLYHZKHHOV
PD\DOVREUHDNXQGHUWKHVHFRQGLWLRQV
.LFNEDFNLVWKHUHVXOWRISRZHUWRROPLVXVHDQGRU
LQFRUUHFWRSHUDWLQJSURFHGXUHVRUFRQGLWLRQVDQGFDQEH
DYRLGHGE\WDNLQJSURSHUSUHFDXWLRQVDVJLYHQEHORZ
1.
0DLQWDLQD¿UPJULSRQWKHSRZHUWRRODQG
position your body and arm to allow you to
resist kickback forces. Always use auxiliary
handle, if provided, for maximum control over
kickback or torque reaction during start-up.
7KHRSHUDWRUFDQFRQWUROWRUTXHUHDFWLRQVRUNLFN
-
EDFNIRUFHVLISURSHUSUHFDXWLRQVDUHWDNHQ
2.
Never place your hand near the rotating acces-
sory.
$FFHVVRU\PD\NLFNEDFNRYHU\RXUKDQG
Do not position your body in the area where
power tool will move if kickback occurs.
.LFNEDFNZLOOSURSHOWKHWRROLQGLUHFWLRQRSSRVLWH
to the wheel’s movement at the point of snagging.
4.
Use special care when working corners, sharp
edges etc. Avoid bouncing and snagging the
accessory.
&RUQHUVVKDUSHGJHVRUERXQFLQJ
KDYHDWHQGHQF\WRVQDJWKHURWDWLQJDFFHVVRU\
DQGFDXVHORVVRIFRQWURORUNLFNEDFN
5.
Do not attach a saw chain woodcarving blade
or toothed saw blade.
6XFKEODGHVFUHDWHIUH
-
TXHQWNLFNEDFNDQGORVVRIFRQWURO
6DIHW\:DUQLQJV6SHFL¿FIRU*ULQGLQJDQG$EUDVLYH
Cutting-Off Operations:
1.
Use only wheel types that are recommended
IRU\RXUSRZHUWRRODQGWKHVSHFL¿FJXDUG
designed for the selected wheel.
Wheels for
ZKLFKWKHSRZHUWRROZDVQRWGHVLJQHGFDQQRWEH
DGHTXDWHO\JXDUGHGDQGDUHXQVDIH
2.
The grinding surface of centre depressed
wheels must be mounted below the plane of
the guard lip.
$QLPSURSHUO\PRXQWHGZKHHOWKDW
SURMHFWVWKURXJKWKHSODQHRIWKHJXDUGOLSFDQQRW
EHDGHTXDWHO\SURWHFWHG
The guard must be securely attached to the
power tool and positioned for maximum safety,
so the least amount of wheel is exposed
towards the operator.
7KHJXDUGKHOSVWRSURWHFW
WKHRSHUDWRUIURPEURNHQZKHHOIUDJPHQWVDFFL
-
GHQWDOFRQWDFWZLWKZKHHODQGVSDUNVWKDWFRXOG
ignite clothing.
4.
Wheels must be used only for recommended
applications. For example: do not grind with
the side of cut-off wheel.
$EUDVLYHFXWRIIZKHHOV
are intended for peripheral grinding, side forces
DSSOLHGWRWKHVHZKHHOVPD\FDXVHWKHPWR
shatter.
5.
$OZD\VXVHXQGDPDJHGZKHHOÀDQJHVWKDWDUH
of correct size and shape for your selected
wheel.
3URSHUZKHHOÀDQJHVVXSSRUWWKHZKHHO
WKXVUHGXFLQJWKHSRVVLELOLW\RIZKHHOEUHDNDJH
)ODQJHVIRUFXWRIIZKHHOVPD\EHGLIIHUHQWIURP
JULQGLQJZKHHOÀDQJHV
6.
Do not use worn down wheels from larger
power tools.
Wheel intended for larger power tool
LVQRWVXLWDEOHIRUWKHKLJKHUVSHHGRIDVPDOOHU
WRRODQGPD\EXUVW
$GGLWLRQDO6DIHW\:DUQLQJV6SHFL¿FIRU$EUDVLYH
Cutting-Off Operations:
1.
Do not “jam“ the cut-off wheel or apply exces-
sive pressure. Do not attempt to make an
excessive depth of cut.
Overstressing the wheel
LQFUHDVHVWKHORDGLQJDQGVXVFHSWLELOLW\WRWZLVWLQJ
RUELQGLQJRIWKHZKHHOLQWKHFXWDQGWKHSRVVLELO
-
LW\RINLFNEDFNRUZKHHOEUHDNDJH
2.
Do not position your body in line with and
behind the rotating wheel.
When the wheel, at
WKHSRLQWRIRSHUDWLRQLVPRYLQJDZD\IURP\RXU
ERG\WKHSRVVLEOHNLFNEDFNPD\SURSHOWKHVSLQ
-
QLQJZKHHODQGWKHSRZHUWRROGLUHFWO\DW\RX
When wheel is binding or when interrupting
a cut for any reason, switch off the power
tool and hold the power tool motionless until
the wheel comes to a complete stop. Never
attempt to remove the cut-off wheel from the
cut while the wheel is in motion otherwise
kickback may occur.
Investigate and take correc-
WLYHDFWLRQWRHOLPLQDWHWKHFDXVHRIZKHHOELQGLQJ
4.
Do not restart the cutting operation in the
workpiece. Let the wheel reach full speed and
carefully re-enter the cut.
7KHZKHHOPD\ELQG
ZDONXSRUNLFNEDFNLIWKHSRZHUWRROLVUHVWDUWHGLQ
the workpiece.
5.
Support panels or any oversized workpiece to
minimize the risk of wheel pinching and kick-
back.
/DUJHZRUNSLHFHVWHQGWRVDJXQGHUWKHLU
RZQZHLJKW6XSSRUWVPXVWEHSODFHGXQGHUWKH
ZRUNSLHFHQHDUWKHOLQHRIFXWDQGQHDUWKHHGJH
RIWKHZRUNSLHFHRQERWKVLGHVRIWKHZKHHO
6.
Use extra caution when making a “pocket cut”
into existing walls or other blind areas.
The
SURWUXGLQJZKHHOPD\FXWJDVRUZDWHUSLSHVHOHF
-
WULFDOZLULQJRUREMHFWVWKDWFDQFDXVHNLFNEDFN
6DIHW\:DUQLQJV6SHFL¿FIRU6DQGLQJ2SHUDWLRQV
1.
Do not use excessively oversized sanding
disc paper. Follow manufacturers recommen-
dations, when selecting sanding paper.
/DUJHU
VDQGLQJSDSHUH[WHQGLQJEH\RQGWKHVDQGLQJ
SDGSUHVHQWVDODFHUDWLRQKD]DUGDQGPD\FDXVH
VQDJJLQJWHDULQJRIWKHGLVFRUNLFNEDFN
6DIHW\:DUQLQJV6SHFL¿FIRU:LUH%UXVKLQJ
Operations:
1.
Be aware that wire bristles are thrown by the
brush even during ordinary operation. Do not
overstress the wires by applying excessive
load to the brush.
7KHZLUHEULVWOHVFDQHDVLO\
penetrate light clothing and/or skin.
2.
If the use of a guard is recommended for wire
brushing, do not allow any interference of the
wire wheel or brush with the guard.
Wire wheel
RUEUXVKPD\H[SDQGLQGLDPHWHUGXHWRZRUNORDG
DQGFHQWULIXJDOIRUFHV
Additional Safety Warnings:
1.
When using depressed centre grinding wheels,
EHVXUHWRXVHRQO\¿EHUJODVVUHLQIRUFHG
wheels.
2.
NEVER USE Stone Cup type wheels with this
grinder.
This grinder is not designed for these
W\SHVRIZKHHOVDQGWKHXVHRIVXFKDSURGXFW
PD\UHVXOWLQVHULRXVSHUVRQDOLQMXU\
