4.4.1
Maintenance Schedule/Record
ACTION:
- Check
- Lubricate
▲
- Change
Hour Meter Reading
Service Date
Serviced By
FIRST USE
Refer to
4.4.2 Break-In Inspections, page 123
100 HOURS OR ANNUALLY
Refer to
4.4.3 Preseason Servicing, page 123
.
It is
recommended that annual maintenance be done prior to
the start of the operating season.
Wheel Bolt Torque - Refer to
.
Wheel Hub Bearings - Refer to
Lubricating the Mower Conditioner, page 125
Conditioner Drive Belt - Refer to
Conditioner Drive Belt, page 207
.
Roll Conditioner Drive Gearbox - Refer to
Conditioner Drive Gearbox, page 211
Mower Conditioner Drive Gearbox Lube Level
- Refer to
.
Driveline Gearboxes (4) Lube Levels - Refer
to
4.6.8 Forward and Rear Swivel Gearboxes,
END OF SEASON
Refer to
4.4.4 End-of-Season Servicing, page 124
10 HOURS OR DAILY
Hydraulic Hoses and Lines - Refer to
Hydraulic Hoses and Lines, page 224
Cutter Blades, De
fl
ectors and Discs - Refer to
.
▲
Tire Pressure - Refer to
.
NOTE: MacDon recommends keeping a record of daily
maintenance as evidence of a properly maintained
machine; however, daily maintenance records are not
required to meet normal warranty conditions.
25 HOURS
Lower Link Pivots - Refer to
the Mower Conditioner, page 125
.
Hitch Pivot - Refer to
.
▲
Roll Conditioner Drive Gearbox - Refer to
Conditioner Drive Gearbox, page 211
Drive Belt Tensioner - Refer to
Conditioner Drive Belt, page 207
.
Roll/Finger Shaft Bearings - Refer to
Lubricating the Mower Conditioner, page 125
NOTE: MacDon recommends keeping a record of daily
maintenance as evidence of a properly maintained
machine; however, daily maintenance records are not
required to meet normal warranty conditions.
169820
121
Revision A
