NOTE:
Arrow indicates forward direction.
2. Place a wooden block between two cutterbar discs to
prevent disc rotation while loosening blade bolts.
3. Remove eight M8 bolts (A) and washers securing the
cover to the non-driven rotary de
fl
ector.
Figure 4.134: 16-Foot Mower
Conditioner Shown
4. Remove the four M10 bolts inside the de
fl
ector drum
using a 12 in. extension and 16 mm socket.
5. Remove wooden block.
6. Remove rotary de
fl
ector.
Figure 4.135: Non-Driven Rotary Deflector
(Top View)
Installing Non-Driven Rotary Deflectors
DANGER
To avoid bodily injury or death from unexpected start-up or fall of a raised machine, stop engine, remove
key, and engage header lift cylinder lock-out valves before going under machine for any reason.
CAUTION
Exercise caution when working around the blades. Blades are sharp and can cause serious injury. Wear
gloves when handling blades.
169820
182
Revision A