5. Remove cutterbar disc cap (A).
6. Remove cutterbar disc (B).
IMPORTANT:
Blades are rotation speci
fi
c. It is necessary to
switch entire disc when swapping spindles.
Figure 4.50: Cutterbar Disc and Cap
7. Remove spacer plate (A).
Figure 4.51: Spacer Plate
8. Rotate spindle hub (A) to access nuts, and remove 11
M12 lock nuts (B) and washers.
Figure 4.52: Left-Hand Spindle Hub
and Hardware
169820
147
Revision A
