3. Remove four nuts (A) from weld studs on center shield,
remove two curtain brackets (B), and remove curtain.
Figure 4.89: Inboard Curtain, Nuts, and Brackets
Installing Cutterbar Inboard Curtain
1. Open cutterbar doors to gain access to inboard curtain
nuts. Refer to
Opening Cutterbar Doors, page 159
.
Figure 4.90: Cutterbar Doors
2. Install curtain onto weld studs on center shield, install
two curtain brackets (B), and secure with four nuts (A).
Figure 4.91: Inboard Curtain and Brackets
169820
164
Revision A
