With Endwise Transport System Option
The mower conditioner is equipped with two bidirectional
amber lights (A) located on the outboard edges of the
carrier frame that function as
fl
ashing hazard lights and
turn signals.
The red lights (B) located on the inboard side of the
amber lights function as both tail and brake lights. Refer
to
3.8.4 Connecting Electrical Wiring Harness, page 50
for information about connecting the mower conditioner’s
electrical harness to the tractor.
Amber re
fl
ective tape (C) is applied to various locations on
the front and sides of the mower conditioner, hitch, and
carrier frame. Red re
fl
ective tape (D) is applied to the rear
of the mower conditioner.
Figure 3.70: Transport Lighting and Reflective
Tape Locations
3.15.5
Converting from Transport to Field Mode (without Optional Endwise
Transport System)
DANGER
Engage brake, stop engine, and remove key from ignition before leaving operator's seat for any reason.
1. Stop engine and remove key from ignition.
2. Connect all hydraulic hoses (refer to
),
and connect electrical
wiring harness.
3. Open the steering lock-out valve by turning the handle
to the horizontal position.
Figure 3.71: Steering Lock-Out Valve in
Open Position
169820
70
Revision A
