Components
13-Foot
16-Foot
Conditioner System
Intermeshing rolls (steel or polyurethane)
Conditioner Speed
900 rpm
Length of Rolls
10 ft.–9 in. (3275 mm)
Roll Diameter
Intermeshing Steel Bars
9 in. (229 mm) / 7 in. (179 mm) tube
Intermeshing Polyurethane Bars
10 in.. (254 mm) / 8 in. (203 mm) tube
Swath Width
36–114 in. (915–2896 mm)
Forming Shields
Carrier mounted assembly with adjustable side de
fl
ectors
Conditioner: Finger Type
Drive
4HB belt driven
Conditioner System
V-shaped tines on rotating drum
Conditioner Speed
896
3
rpm
Rotor Length
10 ft.-9 in. (3275 mm)
Rotor Diameter
25-1/2 in. (648 mm) / 6 in. (152 mm) tube
Swath Width
36–114 in. (915–2896 mm)
Forming Shields
Carrier mounted assembly with adjustable side de
fl
ectors
Ground Speed
Recommended Cutting
5–10 mph (8–15 km/h)
Recommended Transport
20 mph (30 km/h)
Tractor Requirements
PTO Power - Minimum
100 hp (74 kW)
125 hp (93 kW)
Pressure
2000 psi (13.71 MPa)
Hydraulics
4
Controls
Two double-acting / One single-acting
5
Hitch
Draw bar, two-point, or quick attach
NOTE:
Tractor must be equipped with a cab.
3.
Can be set to 600 rpm by interchanging the pulleys.
4.
Endwise Transport System option uses same hydraulic circuit as hitch swing.
5.
Single-acting header lift circuit is converted to double-acting when Endwise Transport System option is installed.
169820
29
Revision A
