6. Remove M10 hex
fl
ange head bolt (A) and remove
vertical shield (B).
Figure 4.214: Vertical Shield
7. Place a suitably sized container under drain plug (A),
and remove plug using a 17 mm socket.
8. Allow suf
fi
cient time for lubricant to drain, replace drain
plug (A), and tighten.
9. Properly dispose of oil.
Figure 4.215: Mower Conditioner Drive Gearbox
Drain Plug
10. Position vertical shield (B) as shown, and install M10
hex
fl
ange head bolt (A).
Figure 4.216: Vertical Shield
169820
216
Revision A
