NOTE:
It may be necessary to remove and replace the driveline shield cones during the greasing procedure. Refer to
Driveline Shield Cone, page 36
for more information.
NOTE:
Use High Temperature Extreme Pressure (EP2) Performance with 10% Max Molybdenum Disulphide
(NLGI Grade 2) Lithium Base unless otherwise speci
fi
ed.
1. Apply grease to driveline slip-joint grease zerks.
Figure 4.24: Every 25 Hours
A - Primary Driveline Slip-Joint
B - Driveline Slip-Joint
169820
129
Revision A