7. Wrap safety chain around hitch and attach to truck
frame (A).
8. Connect electrical harness (B).
9. Check local laws for width regulations and lighting or
marking requirements before transporting on roads.
10. Do not exceed 20 mph (32 km/h).
Figure 3.68: Safety Chain and Electrical Harness
3.15.4
Transport Lighting
Without Endwise Transport System Option
The mower conditioner is equipped with two bidirectional
amber lights (A) located on the outboard edges of the
carrier frame that function as
fl
ashing hazard lights and
turn signals.
The red lights (B) located on the inboard side of the
amber lights function as both tail and brake lights. Refer
to
3.8.4 Connecting Electrical Wiring Harness, page 50
for information about connecting the mower conditioner’s
electrical harness to the tractor.
Amber re
fl
ective tape (C) is applied to various locations on
the front and sides of the mower conditioner, hitch, and
carrier frame. Red re
fl
ective tape (D) is applied to various
locations on the mower conditioner.
Figure 3.69: Transport Lighting and Reflective
Tape Locations
169820
69
Revision A
