19. Remove two hex head bolts (A) and spacers (B)
securing steering arm (C) to gearbox.
20. Lift steering arm (C) off gearbox and secure arm to
hitch (D) with a strap or wire.
21. Reinstall hex head bolts (A) and spacers (B)
into gearbox.
22. Disconnect aft driveline (E) from header drive gearbox.
Refer to
Removing Clutch Driveline, page 199
23. Secure driveline (E) to hitch (D) with a strap or wire.
Figure 4.263: Aft Driveline and Hitch
24. If endwise transport system is installed, disconnect
wiring harness (A) at light assembly (B).
25. Remove plastic ties (E), clamp (D) and clips (C). Retain
for reinstallation.
26. Temporarily attach harness to carrier.
Figure 4.264: Electrical Harness
27. Start tractor, slowly back carrier (A) off header (B), and
maneuver carrier away from header.
Figure 4.265: Carrier Removed from Header
169820
238
Revision A